Sintered porous cermets based on TiB2 and TiB2–TiC–Mo2C
Source abstract
Abstract
Abstract TiB 2 powder, with different binders (Ni and Ni/Mn), after milling were cold compacted (300 MPa) and sintered in H 2 at 1300 and 1350°C for 1 h. To improve the sintering behaviour, TiC/Mo 2 C alloy carbide was added and the milled charge along with the same binders (Ni and Ni/Mn) was cold compacted and sintered under similar conditions. Sintered density, porosity, transverse rupture strength (TRS), grain size and lattice parameter of binder and hard phases were measured. Better densification was observed with Ni/Mn binder as compared to Ni binder for either hard phase based systems. Maximum value of TRS was noted for TiB 2 –TiC–Mo 2 C–40 wt.% Ni/Mn cermet. Melt exudation was observed for either hard phase based systems with Ni binder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. G. Petzow, R. Telle, New developments in the field of refractory hard metals based on cemented boride, in: S. Somiya (Ed.), Advanced Ceramics, Terra Scientific Publishing Company, Tokyo, 1987, pp. 131–143.
2. P.S. Sklad, C.S. Yust, Characterisation of TiB2–Ni ceramics by transmission and analytical electron microscopy, in: R.K. Viswanadham, D.J. Rowcliffe, J. Gurland (Eds.), Science of Hard Materials, Plenum Press, New York, 1981, pp. 911–930.10.1007/978-1-4684-4319-6_50 ↗
3. Hard materials based on cemented TiB2–WC–Co Alloys
4. V.J. Tennery, C.B. Finch, C.S. Yust, G.W. Clark, Structure property correlation for TiB2 ceramics densified using active liquid metals, in: R.K. Viswanadham, D.J. Rowcliffe, J. Gurland (Eds.), Science of Hard Materials, Plenum Press, New York, 1981, pp. 891–909.10.1007/978-1-4684-4319-6_49 ↗
5. Microstructure and mechanical properties of TiB2–W cermets prepared by HIP10.2320/matertrans1989.37.1078 ↗
6. P. Schwarzkopf, R. Kieffer, Refractory Hard Metals, Macmillan, New York, 1953, pp. 276–285.
7. Characterisation of composite of TiC+TiB2 bonded with nickel based binder alloy: mechanical and microstructural properties10.1179/pom.1995.38.1.39 ↗
8. G.S. Upadhyaya, Sintering aspects of non-oxide ceramics, in: C. Ganguly, S.K. Roy, P.R. Roy (Eds.), Advanced Ceramics, Trans Tech Publications, Zurich, 1990, pp. 205–225.10.4028/www.scientific.net/KEM.56-57.205 ↗