journal article·2007-11

Some factors affecting EBSD pattern quality of Ga+ ion-milled face centred cubic metal surfaces

N. Mateescu, M. Ferry, W. Xu, J.M. Cairney

Materials Chemistry and Physics· Volume 106· Issue 1
Publisher page

Abstract

Abstract Using a DualBeam™ platform, it is possible to generate crystallographic volumes of microstructure by sequentially milling submicron slices of a material using the focused ion beam (FIB) and mapping each newly created surface using electron backscatter diffraction (EBSD). The present work describes the influence of some FIB milling parameters on the quality of EBSD patterns obtained on ion-milled surfaces of single crystals of face centred cubic metals: Al, Cu and Au. It was found that milling current (for a constant 30 kV FIB accelerating voltage) has a modest influence on EBSD pattern quality with the highest quality patterns obtained using a current of 1–3 nA. The effect of atomic number on EBSD pattern quality is considerable and discussed in terms of the interaction volumes generated in the sample by both Ga+ ions (FIB) and electrons (EBSD). This information was used successfully for generating 3D-EBSD micrographs of a partly recrystallized nickel sample.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ion-surface interactions and analysis · Electron and X-Ray Spectroscopy Techniques · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Miller · 2000
2. Investigation of orientation gradients around a hard Laves particle in a warm-rolled Fe3Al-based alloy using a 3D EBSD-FIB technique10.1016/j.actamat.2005.11.015 ↗
3. Electron backscattering diffraction investigation of focused ion beam surfaces10.1007/s11664-002-0169-5 ↗
4. 3D reconstruction and characterization of polycrystalline microstructures using a FIB-SEM system10.1016/j.matchar.2006.01.019 ↗
5. Three-dimensional investigation of the texture and microstructure below a nanoindent in a Cu single crystal using 3D EBSD and crystal plasticity finite element simulations10.1016/j.actamat.2005.12.014 ↗
6. 3D determination of grain shape in a FeAl-based nanocomposite by 3D FIB tomography10.1016/S1359-6462(01)01090-9 ↗
7. Redeposition effects in transmission electron microscope specimens of FeAl-WC composites prepared using a focused ion beam10.1016/S0968-4328(03)00007-6 ↗
8. Randle · 2000
9. EDAX Inc. · 2006
10. Grain and subgrain characterisation by electron backscatter diffraction10.1023/A:1017973432592 ↗
11. J.F. Ziegler, Ion beam interactions with matter: introduction of SRIM, http://www.research.ibm.com/ionbeams (2003).
12. Resolution and sensitivity of electron backscattered diffraction in a cold field emission gun SEM10.1016/S0304-3991(97)00003-X ↗
13. Continuous and discontinuous grain coarsening in a fine grained particle-containing Al-Sc alloy10.1016/j.actamat.2004.11.006 ↗
14. W. Xu, M. Ferry, J.M. Cairney, F.J. Humphreys, Origin of microstructural features in recrystallizing nickel using FIB-EBSD tomography, Acta Mater., in press.
15. W. Xu, M. Ferry, N. Mateescu, J.M. Cairney, F.J. Humphreys, Techniques for generating 3D EBSD microstructures using FIB tomography, Mater. Charact., in press.
16. Onset of abnormal subgrain growth in cold rolled {110}<001> oriented copper single crystals10.1016/j.msea.2006.07.035 ↗
17. Particle stimulated nucleation of recrystallization at silica particles in nickel10.1016/S1359-6462(00)00442-5 ↗