journal article·2004-06

Influence on deposition speed and stirring type in the obtantion of titania films

Lucas A. Rocha, Katia J. Ciuffi, Hérica C. Sacco, Eduardo J. Nassar

Materials Chemistry and Physics· Volume 85· Issue 2-3
Publisher page

Abstract

Abstract In this work we studied the preparation of titania thin films by sol–gel process and analyzed the influence of parameters such as deposition speed (100, 200 and 300 mm min−1) and stirring type (magnetic or ultrasound) during the homogenization of the sol used for deposition. Europium III was incorporated into the titania thin films and used as a structural probe. The prepared films present good transparency. Excitation spectrum presents a large band with maximum in 309 nm. This band can be attributed to charge transfer band (CTB). The emission spectra presented the correspondent bands to the transitions of the excited state ( 5 D 0 ) of the ion for the fundamental ( 7 F J=0–4 ). The thickness films depend on deposition speed, we observed a large enhanced when the deposition speed increase of the 100–200 mm min−1 (0.1562–0.4552 nm) and less to 200–300 mm min−1 (0.4552–0.5364 nm). The refractive index for samples obtained in the deposition speed 200 and 300 mm min−1, are respectively 1.9798 and 1.9803. Both are different from the film deposited at 100 mm min−1 (2.3635).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Quantum Dots Synthesis And Properties · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Buckley · J. Chem. Edu. · 1994 · 71 · 59910.1021/ed071p599 ↗
2. Gesser · Chem. Rev. · 1989 · 89 · 76510.1021/cr00094a003 ↗
3. Haruvy · Chem. Mater. · 1997 · 9 · 260410.1021/cm970229m ↗
4. Bahtat · Opt. Mater. · 1997 · 7 · 17310.1016/S0925-3467(97)00016-5 ↗
5. Duverger · J. Non-Cryst. Solids · 1999 · 245 · 12910.1016/S0022-3093(98)00857-6 ↗
6. Chun · Appl. Catal. B: Environmental · 2001 · 30 · 27710.1016/S0926-3373(00)00237-X ↗
7. Hamada · Biomaterials · 2002 · 23 · 226510.1016/S0142-9612(01)00361-1 ↗
8. C.J. Brinker, G.W. Scherer, The Physics and Chemistry of Sol–Gel Processing, Academic Press, New York, 1990.
9. Van Bommel · J. Sol–Gel Sci. Technol. · 1997 · 8 · 45910.1023/A:1018381706632 ↗
10. Reisfeld · J. Alloys Comp. · 2000 · 300/301 · 14710.1016/S0925-8388(99)00714-8 ↗
11. Sorek · Chem. Mater. · 1997 · 9 · 67010.1021/cm960135x ↗
12. Sorek · Appl. Phys. Lett. · 1995 · 66 · 116910.1063/1.113846 ↗
13. Kudrawiec · J. Alloys Comp. · 2002 · 341 · 21110.1016/S0925-8388(02)00080-4 ↗
14. Nassar · J. Alloys Comp. · 2002 · 344 · 22110.1016/S0925-8388(02)00345-6 ↗
15. Serra · J. Alloys Comp. · 1998 · 275/277 · 83810.1016/S0925-8388(98)00453-8 ↗
16. Li · Chem. Mater. · 2002 · 14 · 365110.1021/cm0116830 ↗
17. Nassar · Mater. Chem. Phys. · 2002 · 74 · 1910.1016/S0254-0584(01)00404-7 ↗
18. Nassar · Mater. Res. · 2001 · 4 · 1810.1590/S1516-14392001000100005 ↗
19. Souza · Quı́m. Nova · 2002 · 25 · 106710.1590/S0100-40422002000700004 ↗
20. Richardson · Chem. Rev. · 1982 · 82 · 54110.1021/cr00051a004 ↗
21. Reisfeld · Struct. Bond. · 1979 · 30 · 6510.1007/3-540-07887-8_2 ↗
22. Blasse · Adv. Inorg. Chem. · 1990 · 35 · 31910.1016/S0898-8838(08)60165-8 ↗
23. Jin · J. Alloys Comp. · 1998 · 265 · 23410.1016/S0925-8388(97)00301-0 ↗
24. Hazenkamp · Chem. Mater. · 1990 · 2 · 10510.1021/cm00008a008 ↗