journal article·2026-08Open access

Synergistic adsorption of mixed anionic and cationic dyes by polyaniline/CuFe2O4 composites

Amir Muhammad, Anwar-ul-Haq Ali Shah, Salma Bilal, Samia Firdous

Abstract

Mixed anionic and cationic dyes in industrial wastewater demand adsorbent materials with tunable surface charge behaviour, a challenge unmet by conventional single-function materials. This work develops a magnetically separable polyaniline/copper ferrite (PANI/CuFe 2 O 4 ) nanocomposite through in-situ oxidative polymerisation for dual-mode dye capture via engineered interfacial architecture. Structural characterisation by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX) and Fourier-transform infrared (FTIR) spectroscopy confirmed integration of inverse-spinel CuFe 2 O 4 nanoparticles (crystallite size 39.8 nm by Scherrer analysis on the (311) reflection, cubic spinel structure, ICDD PDF 89-598) within the emeraldine-salt PANI matrix. Brunauer–Emmett–Teller analysis revealed specific surface area enhancement (44.2 m 2 g -1 for the composite vs. 37.2 m 2 g -1 for pristine PANI), with embedded ferrite nanoparticles disrupting polymer chain aggregation. Batch adsorption experiments demonstrated maximum capacities of 305.5 mg g -1 for anionic Acid Blue 40 (AB40, optimal pH 2–3) and 291.2 mg g -1 for cationic Basic Blue 3 (BB3, optimal pH 9–11) on pristine PANI, and 202.8 mg g -1 (AB40) and 67.08 mg g -1 (BB3) on the magnetically separable PANI/CuFe 2 O 4 composite, exceeding those of conventional activated-carbon adsorbents. Kinetic analysis fitted pseudo-second-order models (R 2 = 0.983–0.994) with activation energies of 21.7–35.7 kJ mol -1 , confirming a physisorption-dominated regime. Thermodynamic parameters (ΔG° = −7.6 to −15.5 kJ mol -1 , ΔH° = −30.2 to −49.6 kJ mol -1 , ΔS° = −223.7 to −496.3 J mol -1 K -1 ) indicated spontaneous, exothermic adsorption. Combined spectroscopic evidence quantified four synergistic mechanisms: electrostatic attraction (40–50%), π–π stacking (25–30%), hydrogen bonding (15–20%), and metal coordination (5–10%). The composite exhibited superparamagnetic behaviour enabling rapid magnetic recovery (>99.5% within 5 min) and maintained 87% adsorption capacity after five regeneration cycles, demonstrating industrial viability for treating complex textile effluents containing mixed-dye systems.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Conducting polymers and applications · Adsorption and biosorption for pollutant removal · Nanomaterials for catalytic reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Removal of synthetic dyes from wastewaters: a review10.1016/j.envint.2004.02.001 ↗
2. Christie · 2001
3. Remediation of dyes in textile effluent: a critical review on current treatment technologies with a proposed alternative10.1016/S0960-8524(00)00080-8 ↗
4. Textile dyeing industry: an environmental hazard
5. Effects of textile dyes on health and the environment and bioremediation potential of living organisms
6. The significance of azo-reduction in the mutagenesis and carcinogenesis of azo dyes10.1016/0165-1110(83)90035-0 ↗
7. Assessing mutagenicity of textile dyes from pali (rajasthan) using ames bioassay
8. Review paper on current technologies for decolourisation of textile wastewaters: perspectives for anaerobic biotechnology10.1016/j.biortech.2006.11.013 ↗
9. Dye and its removal from aqueous solution by adsorption: a review10.1016/j.cis.2014.04.002 ↗
10. Textile dyes: dyeing process and environmental impact
11. Treatment of textile wastewater by advanced oxidation processes ‒ a review
12. Science and technology for water purification in the coming decades10.1038/nature06599 ↗
13. An overview on the removal of synthetic dyes from water by electrochemical advanced oxidation processes10.1016/j.chemosphere.2017.12.195 ↗
14. Insights into the modeling of adsorption isotherm systems10.1016/j.cej.2009.09.013 ↗
15. Adsorption isotherm and kinetic modelling for dye removal: a tutorial review
16. Suhas. Application of low-cost adsorbents for dye removal ‒ a review10.1016/j.jenvman.2008.11.017 ↗
17. Advantages and disadvantages of techniques used for wastewater treatment10.1007/s10311-018-0785-9 ↗
18. Polyaniline and polypyrrole: a comparative study of the preparation10.1016/j.eurpolymj.2007.03.045 ↗
19. Adsorption of sulfonated dyes by polyaniline emeraldine salt and its kinetics10.1021/jp803903x ↗
20. Conducting polymers prepared by oxidative polymerisation: polyaniline10.1016/S0079-6700(98)00008-2 ↗
21. Polyaniline nanofibers: a unique polymer nanostructure for versatile applications10.1021/ar800080n ↗
22. Self-assembly of polyaniline ‒ from nanotubes to hollow microspheres10.1002/adfm.200304458 ↗
23. Magnetic nanoparticles: synthesis, protection, functionalisation, and application10.1002/anie.200602866 ↗
24. Infrared spectra of ferrites10.1103/PhysRev.99.1727 ↗
25. Spinel ferrite oxide semiconductor gas sensors
26. Charge-dependent adsorption on iron oxides at variable pH
27. Copper ferrite–polyaniline nanocomposite: structural, thermal, magnetic and dye adsorption properties10.1016/j.solidstatesciences.2019.05.007 ↗
28. Removal of textile dyes using starch-graft-polyaniline/Fe3O4 magnetic composite
29. Synergistic adsorption of mixed-charge dye systems on polymer/ferrite composites
30. CO2-responsive smart wood scaffold for natural-organic-matter removal without secondary pollution
31. Molecular mechanisms governing the adsorption, deposition, and removal of environmentally aged microplastics by engineered surfaces10.1021/acs.est.5c16655 ↗
32. Efficiency of various recent wastewater dye removal methods: a review10.1016/j.jece.2018.06.060 ↗
33. Recent trends in adsorptive removal of dyes from textile wastewater: a critical overview
34. Current scenario and challenges in adsorption for water treatment10.1016/j.jece.2020.103988 ↗
35. Fabrication of PANI@Fe–Mn–Zr hybrid material and assessments in sono-assisted adsorption of methyl red dye: Uptake performance and response surface optimization10.1016/j.jics.2022.100635 ↗
36. Adsorption characteristics of brilliant green dye on kaolin10.1016/j.jhazmat.2008.03.110 ↗
37. Adsorption and magnetic removal of neutral red dye from aqueous solution using Fe3O4 hollow nanospheres10.1016/j.jhazmat.2010.05.119 ↗
38. Irradiation treatment of azo dye containing wastewater10.1016/j.radphyschem.2007.05.003 ↗
39. Synthesis of CuFe2O4–bentonite composite for adsorption of Ni(II) from electroplating wastewater10.4028/www.scientific.net/AMR.1112.213 ↗
40. Comparative study of the adsorption of acid blue 40 on polyaniline, magnetic oxide and their composites: synthesis, characterisation and application10.3390/ma12182854 ↗
41. Zur Theorie der sogenannten Adsorption gelöster Stoffe
42. Pseudo-second-order model for sorption processes10.1016/S0032-9592(98)00112-5 ↗
43. Über die Reaktionsgeschwindigkeit bei der Inversion von Rohrzucker durch Säuren10.1515/zpch-1889-0416 ↗
44. Kinetics of adsorption on carbon from solution10.1061/JSEDAI.0000430 ↗
45. van ’t Hoff · 1884
46. Some consideration on the Langmuir-isotherm equation10.1016/j.colsurfa.2005.08.029 ↗
47. The scherrer formula for X-ray particle-size determination10.1103/PhysRev.56.978 ↗
48. Removal of hexavalent chromium ions and acid red 18 by superparamagnetic CoFe2O4/polyaniline nanocomposites under external ultrasonic fields10.1016/j.micromeso.2021.111275 ↗
49. Thermally induced nonlinear optical response and optical-power limiting of acid blue 40 dye10.1016/j.cap.2013.03.002 ↗
50. Fabrication and characterisation of a flexible and disposable impedance-type humidity sensor based on polyaniline10.1039/D3RA00009E ↗
51. FTIR investigations of polyaniline/ferrite nanocomposites for dye-adsorption applications
52. Basic blue dye adsorption from water using polyaniline/magnetite (Fe3O4) composites: kinetic and thermodynamic aspects10.3390/ma12111764 ↗
53. Mg-doped copper ferrite with polyaniline matrix core–shell ternary nanocomposite for electromagnetic-interference shielding10.1007/s10904-018-0907-7 ↗
54. Polyaniline-based adsorbents for aqueous-pollutant removal: a review
55. Adsorptive removal of dyes from aqueous solution onto carbon nanotubes: a review10.1016/j.cis.2013.03.003 ↗
56. pH-dependent surface charging and points of zero charge. IV. Update and new approach10.1016/j.jcis.2009.04.072 ↗
57. Dimerisation constants of sulfonated azo dyes in water and their relevance to spectrophotometric determinations
58. Comparative kinetic study of dye adsorption on conducting-polymer composites: Pseudo-First-order vs pseudo-second-order modelling
59. Preparation of a PANI/znO composite for efficient photocatalytic degradation of acid blue
60. Theoretical models of sorption kinetics including a surface-reaction mechanism: a review10.1016/j.cis.2009.07.009 ↗
61. Is the free-energy change of adsorption correctly calculated?10.1021/je800661q ↗
62. A consideration of the correct calculation of thermodynamic parameters of adsorption10.2298/JSC0712363M ↗
63. Removal of methylene blue from aqueous solution by a solvothermal-synthesised graphene/magnetite composite10.1016/j.jhazmat.2011.06.068 ↗
64. Rapid removal of Auramine-O and methylene blue by zns:cu nanoparticles loaded on activated carbon: a response-surface-methodology approach10.1016/j.jtice.2015.02.026 ↗
65. Benchmarking of polymer-composite adsorbents for industrial dye-laden wastewater: capacity, recyclability, and magnetic separability
66. Hierarchical composite polyaniline‒(electrospun polystyrene) fibres applied to heavy-metal remediation
67. Activated carbon/Fe3O4 nanoparticle composite: fabrication, methyl Orange removal and regeneration by hydrogen peroxide
68. Studies on adsorption of crystal-violet dye from aqueous solution onto coniferous-pinus bark powder10.1016/j.jhazmat.2009.06.060 ↗
69. Chitosan/polyaniline/MnFe2O4 hybrid for Congo red adsorption
70. Visible-light-driven photocatalytic degradation of organic dyes using CuFe2O4 nanoparticles