journal article·2026-05Open access

Small-angle neutron scattering analysis in graphene reinforced Sn–Ag lead-free solder alloys

Jayesh Shanthi Bhavan, Gokulnath Kadavath, Dirk Honecker

Abstract

The addition of Graphene Nano Sheets (GNS) to Sn-Ag alloys presents a promising approach for enhancing lead-free solder materials, aiming to improve structural integrity and mechanical properties for electronic applications. In this study, we investigate the microstructural evolution and property enhancements in a Sn-Ag-GNS composite using Small-Angle Neutron Scattering (SANS), X-Ray Diffraction (XRD), and Electron Backscatter Diffraction (EBSD) techniques. SANS analysis indicates that the specific surface area of the Sn-Ag-GNS composite increased from 2.4 m 2 /g in the base Sn-Ag alloy to 3.2 m 2 /g with the addition of GNS—a 25% rise that reflects the introduction of additional interfaces by the graphene. Furthermore, the fractal dimension ( Df ) decreased from 3.0 to 2.7, pointing to the development of rougher and more intricate interfacial structures that can enhance crack resistance and overall toughness. Such a reduction in fractal dimension reflects increased interfacial roughness, which is known to promote crack deflection and tortuous crack paths, thereby enhancing energy dissipation and resistance to crack propagation. The incorporation of GNS also disrupts the initial crystallographic texture, leading to a more isotropic grain orientation, which in turn promotes uniform mechanical behavior in all directions. Together, these findings demonstrate that GNS significantly improves the microstructure of Sn-Ag alloys by introducing refined grain structures, enhanced interfacial complexity, and increased isotropy, which are microstructural features commonly associated with enhanced mechanical performance and reliability in Sn-based solder systems. This study underscores the potential of GNS-reinforced Sn-Ag alloys as high-performance, lead-free solder materials suitable for modern electronic applications. • Small-angle neutron scattering (SANS) was employed to quantify nanoscale interfacial evolution in graphene-reinforced Sn–Ag lead-free solder alloys. • Graphene nanosheet incorporation increased the SANS-derived specific surface area by ∼25% and reduced the effective fractal dimension from ∼3.0 to ∼2.7. • Shape-dependent SANS modelling revealed the development of larger anisotropic nanoscale domains following graphene addition. • Multiscale correlation of SANS, XRD, and EBSD demonstrates enhanced interfacial complexity, constrained grain growth, and increased lattice strain in the Sn matrix.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Nanomaterials and Printing Technologies · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Soldering and brazing
2. Lead-free Solder
3. A Review of TiO2-nanoparticle Reinforced Lead-Free Solder Composites Used in Electronic Components Soldering10.1016/B978-0-12-819728-8.00002-4 ↗
4. The EU Directives on Waste Electrical and Electronic Equipment and on the Restriction of Use of Certain Hazardous Substances in Electrical and Electronic Equipment: Adoption Achieved10.54648/EELR2003007 ↗
5. A review of the recent development, challenges, and opportunities of electronic waste (e-waste)10.1007/s13762-022-04274-w ↗
6. A review on thermal cycling and drop impact reliability of SAC solder joint in portable electronic products10.1016/j.microrel.2011.07.093 ↗
7. The Effect of Cooling Rate on Grain Orientation and Misorientation Microstructure of SAC105 Solder Joints Before and After Impact Drop Tests10.1007/s11664-014-3176-4 ↗
8. Lead-free Solders in Microelectronics10.1016/S0927-796X(00)00010-3 ↗
9. A review on nanodispersed lead-free solders in electronics: synthesis, microstructure and intermetallic growth characteristics10.1007/s10853-022-07187-8 ↗
10. Nucleation and growth of Ag3Sn in Sn-Ag and Sn-Ag-Cu solder alloys10.1016/j.actamat.2023.118831 ↗
11. Influence of temperature gradient bonding on the micromorphology and shear performance of Sn-based solder joints: Experiments and first principles calculations10.1016/j.jmapro.2024.05.057 ↗
12. Study of microstructure, growth orientations and shear performance of Cu/Sn-3.0Ag-0.5Cu/Cu solder joints by using thermal gradient bonding10.1016/j.matchar.2023.113133 ↗
13. Study on the microstructure and mechanical property of Cu-foam modified Sn3.0Ag0.5Cu solder joints by ultrasonic-assisted soldering10.1016/j.jmapro.2021.02.003 ↗
14. Effect of Ag content on the microstructure development of Sn-Ag-Cu interconnects10.1007/s10854-006-6758-y ↗
15. Characterization of the microstructure of tin-silver lead free solder10.1016/j.jallcom.2016.02.177 ↗
16. Evolution of Structure Unidirectionally Solidified Sn–Ag3Sn Eutectic Alloy10.2320/matertrans.46.916 ↗
17. The effects of temperature gradient and growth rate on the microstructure of directionally solidified Sn–3.5Ag eutectic solder10.1007/s10854-011-0422-x ↗
18. The Microstructure, Thermal Fatigue, and Failure Analysis of Near-Ternary Eutectic Sn-Ag-Cu Solder Joints10.2320/matertrans.45.695 ↗
19. A Review on the Development of Adding Graphene to Sn-Based Lead-Free Solder10.3390/met13071209 ↗
20. Novel electroless plating of silver nanoparticles on graphene nanoplatelets and its application for highly conductive epoxy composites10.1016/j.jiec.2021.01.014 ↗
21. Strengthening effect of single-atomic-layer graphene in metal–graphene nanolayered composites10.1038/ncomms3114 ↗
22. Reinforcement with graphene nanosheets in aluminum matrix composites10.1016/j.scriptamat.2012.01.012 ↗
23. Effects of graphene nanosheets addition on microstructure and mechanical properties of SnBi solder alloys during solid-state aging10.1016/j.msea.2017.04.105 ↗
24. Sn–3.0Ag–0.5Cu nanocomposite solders reinforced by graphene nanosheets10.1007/s10854-016-4631-1 ↗
25. Small-angle neutron scattering analysis in Sn-Ag Lead-free solder alloys: A focus on the Ag3Sn Sn intermetallic phase10.1016/j.matchar.2024.114385 ↗
26. EBSD characterization of graphene nano sheet reinforced Sn–Ag solder alloy composites10.1016/j.jmrt.2024.04.043 ↗
27. Kratky · 1988 · 1
28. Principles of the Theory of X-Ray and Neutron Scattering
29. Small-angle scattering from porous solids with fractal geometry10.1088/0022-3727/19/8/021 ↗
30. Feigin · 1987