Anodic film formation on aluminium alloys: Analysis of defects induced by constituent intermetallic particles
Source abstract
Abstract
In the present study, anodic film formation on high-strength aluminium alloys (AA2024-T3, AA2198-T8, AA2198-T851 and AA7475-T761) in tartaric–sulfuric acid (TSA) is investigated, with focus on defects induced by the dissolution of constituent intermetallic particles (IMPs) during anodizing. High-copper-containing IMPs dissolve rapidly, generating micrometre-sized cavities in resultant anodic films. In contrast, Fe-Mn-Si (Cu) IMPs in AA2024-T3 and low-copper-containing IMPs in AA7475-T761 exhibit slower dissolution rate than high-copper-containing ones, resulting in locally modified porous morphology and non-uniform film thickness. Further, it is observed that the morphological and compositional uniformity of resultant anodic films are largely affected by the size, location and composition of IMPs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Aluminum Alloy Microstructure Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Macroscopic and local filming behavior of AA2024 T3 aluminum alloy during anodizing in sulfuric acid electrolyte10.1149/1.2931522 ↗
2. Modelling the anodizing behaviour of aluminium alloys in sulphuric acid through alloy analogues10.1016/j.corsci.2008.09.019 ↗
3. Preferential anodic oxidation of second-phase constituents during anodising of AA2024-T3 and AA7075-T6 alloys10.1002/sia.3191 ↗
4. The behaviour of second phase particles during anodizing of aluminium alloys10.1016/j.corsci.2010.03.029 ↗
5. Behavior of second-phase particles in Al5052 alloy during anodizing in a sulfuric acid solution CSLM observation10.1149/1.1752933 ↗
6. Application of CSLM to the surface morphological study of Al 5052 alloy anodized in sulfuric acid solution10.1149/1.1603248 ↗
7. Hardness and corrosion behaviour of anodised Al-Si produced by rheocasting10.1016/j.matdes.2019.107764 ↗
8. In situ and operando AFM and EIS studies of anodization of Al 6060: influence of intermetallic particles10.1149/2.0061610jes ↗
9. Influence of Fe-rich intermetallics and their segregation on anodising properties of Al-Si-Mg rheocast alloys10.1016/j.surfcoat.2021.127570 ↗
10. Anodizing Al–Si foundry alloys: a critical review10.1002/adem.202101480 ↗
11. TSA anodising voltage effects on the near-surface coarse intermetallic particles in the AA2024-T3 and AA2198-T8 alloys10.1080/1478422X.2022.2071666 ↗
12. Discontinuities in the porous anodic film formed on AA2099-T8 aluminium alloy10.1016/j.corsci.2011.08.023 ↗
13. Microstructural origin of localized corrosion in anodized AA2099-T8 aluminium–lithium alloy10.1002/sia.5856 ↗
14. Hard anodizing of AA2099-T8 aluminum lithium copper alloy: influence of electric cycle, electrolytic bath composition and temperature10.1016/j.surfcoat.2017.07.028 ↗
15. Effect of iron-containing intermetallic particles on film structure and corrosion resistance of anodized AA2099 alloy10.1149/2.1361809jes ↗
16. Corrosion behavior of anodized Al-Cu-Li alloy: the role of intermetallic particle-introduced film defects10.1016/j.corsci.2019.108110 ↗
17. Anodizing of multiphase aluminium alloys in sulfuric acid: in-situ electrochemical behaviour and oxide properties10.1016/j.electacta.2016.06.131 ↗
18. Anodisation of aluminium alloys by micro-capillary technique as a tool for reliable, cost-efficient, and quick process parameter determination10.1155/2016/1374897 ↗
19. The effect of tartaric-sulfuric acid (TSA) anodizing on the corrosion resistance of the AA7475-T761
20. Trace elements and their impact on surface finishing characteristics of aluminum extrusions
21. Runge · 2015
22. Anodizing complex 7000 series
23. Electrochemical behavior of anodized AA7075-T73 alloys as affected by the matrix structure10.1016/j.apsusc.2013.06.094 ↗
24. An assessment of pitting corrosion in anodized aluminum alloys: it might not be what it seems10.1002/maco.202313977 ↗
25. A historical, statistical and electrochemical approach on the effect of microstructure in the anodizing of Al alloys: a review10.1080/10408436.2023.2230250 ↗
26. Prasad · 2016 · vol. 1
27. Ultramicrotomy – a route towards the enhanced understanding of the corrosion and filming behaviour of aluminium and its alloys10.1016/S0010-938X(98)00006-7 ↗
28. Reaction rates of second-phase constituents in aluminium during etching, brightening and oxalic acid anodizing processes10.1080/00202967.1968.11870048 ↗
29. Effects of alloying elements in anodizing of aluminium10.1080/00202967.1997.11871137 ↗
30. Influence of hard anodizing on the mechanical and corrosion properties of different aluminum alloys10.1007/s13632-019-00594-5 ↗
31. Discoloration of anodized AA6063 aluminum alloy10.1149/2.065406jes ↗
32. Chromium/nickel-free conversion coating as cold post-treatment to anodized AA2024-T3 for corrosion resistance increase10.1016/j.surfcoat.2024.130566 ↗
33. Improving the cavitation corrosion resistance of 6061 aluminum alloy by anodizing10.1016/j.electacta.2024.144890 ↗
34. Localized corrosion in anodized aluminium alloys: the role of constituent particle-induced defects in anodic films10.1016/j.corsci.2025.112961 ↗
35. Davis · 1993
36. Kock · 2004
37. Shimizu · 2010 · 37
38. Sample preparation of anodised aluminium oxide coatings for scanning electron microscopy10.1016/j.micron.2017.06.010 ↗
39. Thermomechanical treatment and corrosion resistance correlation in the AA2198 al–cu–li alloy10.1080/1478422X.2019.1637077 ↗
40. Comparison of constituent intermetallic particles in different aluminium alloys10.1007/s13632-025-01170-w ↗
41. Discontinuities in the porous anodic film formed on AA2099-T8 aluminium alloy10.1016/j.corsci.2011.08.023 ↗
42. S.P.A. Alenia Aeronautica, Anodizing Process, with Low Environmental Impact, for a Workpiece of Aluminium or Aluminium Alloys, European Patent Application EP 1233084 A2.
43. Anodizing of aluminum in sulfuric Acid/Boric acid mixed electrolyte10.1149/2.032306jes ↗
44. Effect of iron-containing intermetallic particles on film structure and corrosion resistance of anodized AA2099 alloy10.1149/2.1361809jes ↗
45. Shimizu · 2010 · 37
46. Structure of porous anodic films formed on Al-Si alloys10.2464/jilm.37.807 ↗
47. Anodizing of aluminium alloys10.1108/00022669910270709 ↗
48. Anodisation of aluminium alloys by micro-capillary technique as a tool for reliable, cost-efficient, and quick process parameter determination10.1155/2016/1374897 ↗
49. The influence of θ′ precipitates on the anodizing behaviour of binary Al-Cu alloys10.1016/S0010-938X(97)83347-1 ↗
50. Aluminium porous oxide growth. On the electric conductivity of the barrier layer10.1016/0040-6090(94)06293-5 ↗
51. Porous anodic film formation on aluminium10.1038/290230a0 ↗
52. The morphology and mechanism of formation of porous anodic films on aluminium10.1098/rspa.1970.0129 ↗
53. Preferential anodic oxidation of second-phase constituents during anodising of AA2024-T3 and AA7075-T6 alloys10.1002/sia.3191 ↗
54. Cyclic oxidation processes during anodizing of Al-Cu alloys10.1016/j.electacta.2007.05.052 ↗
55. The anodizing of aluminium in sulphate solutions10.1016/0013-4686(70)85024-1 ↗
56. Mechanism of film growth during anodizing of Al-alloy-8090/SiC metal matrix composite in sulphuric acid electrolyte10.1023/A:1018623623116 ↗
57. Mobility of copper ions in anodic alumina films10.1016/S0013-4686(96)00454-9 ↗
58. The behaviour of iron-containing intermetallic particles in aluminium alloys in alkaline solution
59. Developing digital twin design for enhanced productivity of an automated anodizing industry and process prediction using hybrid deep neural network10.1016/j.engappai.2023.106086 ↗
60. Machine learning for automated experimentation in scanning transmission electron microscopy10.1038/s41524-023-01142-0 ↗
61. Image driven machine learning methods for microstructure recognition10.1016/j.commatsci.2016.05.034 ↗