An innovative approach for using non-noble metals as an alternative initiator for electroless copper plating of non-conductive materials
Source abstract
Abstract
In the present study, a new approach to inducing the electroless copper deposition reaction was established utilising non-noble metals (zinc (Zn) and cobalt (Co)) as more sustainable, inexpensive, alternative initiators for electroless copper deposition with particular applicability to the coating of non-conductive materials. This work presents an innovative approach to replace critical raw materials (CRMs) like palladium (Pd) with more sustainable metals, addressing the growing risks of supply disruptions that threaten the progress of modern technologies, particularly in catalytic applications. The investigation involved the analysis of precipitates and electroless copper deposits using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and electrochemical analysis employing cyclic voltammetry (CV), impedance spectroscopy (EIS) and Tafel plots. The study clearly demonstrated that zinc (Zn) and cobalt (Co) particles are capable of initiating the electroless copper deposition process despite the fact that cyclic voltammetry (CV) analysis indicated no detectable oxidation of the reducing agent on either Zn or Co. Such results provide compelling evidence for a non-catalytic, indirect initiation mechanism for electroless copper deposition on these metals. Complementary X-ray photoelectron spectroscopy (XPS) analysis confirmed the deposition of copper on the surfaces of Zn and Co particles, even in the absence of the reducing agent. For the first time, a mechanism for the indirect initiation of electroless copper deposition by non-noble metals (Zn and Co) has been elucidated. The key step involves a displacement (or galvanic exchange) reaction that facilitates the initial deposition of copper onto the non-noble metal surface. Subsequent copper deposition proceeds via the conventional electroless process, catalysed by the oxidation of formaldehyde on this preliminary copper layer. This indirect initiation mechanism contrasts with the well-known ‘direct’ Pd initiation process, whereby the first layer of copper is formed by the catalytic oxidation of formaldehyde on the Pd particles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A review of electroless coatings on non-metals: bath conditions, properties and applications10.1016/j.jallcom.2023.170723 ↗
2. Di Quarto · 1972
3. The evolution of pd∕Sn catalytic surfaces in electroless copper deposition10.1149/1.3536543 ↗
4. Research on a new surface activation process for electroless plating on ABS plastic10.1016/j.matlet.2007.07.055 ↗
5. EL Latunussa · 2020
6. Electrochemical metal recycling: recovery of palladium from solution and in situ fabrication of palladium-carbon catalysts via impact electrochemistry10.1021/jacs.2c08239 ↗
7. Anodic oxidation of reductants in electroless plating
8. Initiation of electroless nickel plating on copper, Palladium‐activated copper, gold, and platinum10.1149/1.2115559 ↗
9. The electrocatalytic oxidation of sodium borohydride at palladium and gold electrodes for an application to the direct borohydride fuel cell10.1149/1.3210697 ↗
10. Electroless copper on refractory and noble metal substrates with an ultra-thin plasma-assisted atomic layer deposited palladium layer10.1016/j.electacta.2005.07.018 ↗
11. Kheawhom · 2021
12. From the sabatier principle to a predictive theory of transition-metal heterogeneous catalysis10.1016/j.jcat.2014.12.033 ↗
13. G. Mallory and J. B. Hajdu, “Electroless Plating : Fundamentals and Applications.”.
14. Catalytic oxidation of formaldehyde over different silica supported platinum catalysts10.1016/j.cej.2012.10.096 ↗
15. Plating on acrylonitrile–butadiene–styrene (ABS) plastic: a review10.1007/s10853-015-9668-7 ↗
16. Formation of electroless barrier and seed layers in a high aspect ratio through-Si vias using Au nanoparticle catalyst for all-wet Cu filling technology10.1016/j.electacta.2011.02.078 ↗
17. The effect of differently sized Ag catalysts on the fabrication of a silicon nanowire array using Ag-assisted electroless etching10.1016/j.cap.2012.11.011 ↗
18. Electroless copper plating obtained by selective metallisation using a magnetic field (SMMF)10.1016/j.electacta.2021.138763 ↗
19. Atomic-scale flattening of SiC surfaces by electroless chemical etching in HF solution with Pt catalyst10.1063/1.2739084 ↗
20. Structural and spectroscopic characterization of porous silicon carbide formed by Pt-assisted electroless chemical etching10.1016/S0038-1098(03)00130-3 ↗
21. Laser-enhanced electroless plating of silver seed layers for selective electroless copper deposition10.2351/1.2995767 ↗
22. Selective metallization induced by laser activation: fabricating metallized patterns on polymer via metal oxide composite10.1021/acsami.6b15828 ↗
23. Electroless copper plating on PC engineering plastic with a novel palladium-free surface activation process10.1016/j.surfcoat.2014.04.005 ↗
24. Lu · 2014 · 240
25. Recent advances in electroless nickel-boron coatings10.1016/j.surfcoat.2021.127937 ↗
26. Studies on the physical and electrochemical properties of Ni-P coating on commercial aluminum as bipolar plate in PEMFC10.1016/j.fuel.2018.08.104 ↗
27. Monitoring of zincate pre-treatment of aluminium prior to electroless nickel plating10.1080/00202967.2016.1236573 ↗
28. Structural, optical, XPS and magnetic properties of Zn particles capped by ZnO nanoparticles10.1016/j.jallcom.2015.01.285 ↗
29. XPS study of zinc hydroxide as a potential corrosion product of zinc: rapid X-ray induced conversion into zinc oxide10.1016/j.corsci.2014.01.037 ↗
30. XPS studies on a novel amorphous ni–co–w–b alloy powder10.1016/S0169-4332(97)00223-7 ↗
31. Quantitative XPS analysis of silica-supported Cu–Co oxides10.1016/S0169-4332(99)00568-1 ↗
32. A first quantitative XPS study of the surface films formed, by exposure to water, on Mg and on the Mg–Al intermetallics: Al3Mg2 and Mg17Al1210.1016/j.corsci.2009.02.017 ↗