Electrophoretically deposited nano TiO2/Ag powder to protect fuel cell Ni cathode from dissolution in molten carbonate
Source abstract
Abstract
This study presents a promising method for improving the performance of Molten Carbonate Fuel Cell (MCFC) and decreasing the solubility of nickel cathode in the harsh environment of molten carbonate electrolyte. The functional properties of a porous nickel cathode produced by tape casting and reinforced with Ni foam were enhanced by electrophoretic deposition (EPD) of TiO 2 /Ag particles. The deposition parameters were optimized, and the coated cathode was characterized using multiple techniques, including SEM and EDS. The influence of the deposited TiO 2 /Ag particles was evaluated with electrical conductivity tests, solubility measurements, and single-cell performance tests. The obtained results demonstrate a significant improvement in cell efficiency, with power output increasing from 90 mW/cm 2 for the reference Ni cathode to 100 mW/cm 2 for the modified cathode. Furthermore, cathode solubility was reduced by 300%. These findings suggest that the EPD method has strong potential for practical application and novelty based on advancing MCFC performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Larminie · 2003
2. MCFC versus other fuel cells-Characteristics, technologies and prospects
3. Molten carbonate fuel cells10.1016/j.cossms.2004.12.005 ↗
4. Analysis of endurance issues for MCFC10.1016/S0378-7753(99)00448-6 ↗
5. The stability of LiAlO2 powders and electrolyte matrices in molten carbonate fuel cell environment10.1016/j.ceramint.2012.10.236 ↗
6. Mechanical strength improvement of aluminum foam-reinforced matrix for molten carbonate fuel cells10.1016/j.ijhydene.2017.03.096 ↗
7. Plomp · 1992 · vol. 39 · 369
8. Ternary alkali carbonate composition-oxygen solubility relationship under atmospheric and pressurized conditions - a utility model for MCFC10.1023/A:1014225725716 ↗
9. A review on MCFC matrix: state-of-the-art, degradation mechanisms and technological improvements10.1016/j.heliyon.2024.e25847 ↗
10. Atomistic insight into the electrode reaction mechanism of the cathode in molten carbonate fuel cells10.1039/C7TA02011B ↗
11. Study of NiO cathode modified by ZnO additive for MCFC10.1016/j.jpowsour.2003.10.008 ↗
12. Influence of lanthanum oxide as quality promoter on cathodes for MCFC10.1016/S0378-7753(01)01043-6 ↗
13. Improvement of MCFC cathode stability by additives10.1016/S0013-4686(02)00353-5 ↗
14. Performance of LiCoO2-coated NiO cathode under pressurized conditions10.1016/S0378-7753(01)01047-3 ↗
15. Electrochemical characterization of La0.8Sr 0.2MnO3-coated NiO as cathodes for molten carbonate fuel cells10.1007/s10800-005-9022-x ↗
16. Cobalt and cerium coated Ni powder as a new candidate cathode material for MCFC10.1016/j.electacta.2006.01.073 ↗
17. TiO2-coated Ni powder as a new cathode material for molten carbonate fuel cells10.1016/j.jpowsour.2005.03.236 ↗
18. Multi-modal porous microstructure for high temperature fuel cell application10.1016/j.jpowsour.2017.11.009 ↗
19. Porous nickel MCFC cathode coated by potentiostatically deposited cobalt oxide. II. Structural and morphological behavior in molten carbonate
20. Performance of LiCoO2-coated NiO cathode under pressurized conditions10.1016/S0378-7753(01)01047-3 ↗
21. Solubility and electrochemical studies of LiFeO2-LiCoO2-NiO materials for the MCFC cathode application10.1016/j.jpowsour.2006.04.136 ↗
22. Electrochemical stability and solubility of Ni-Fe-Co ternary alloy oxides in Li/Na carbonate eutectic as an alternative material for MCFC cathodes10.1039/B202973A ↗
23. Silver coated cathode for molten carbonate fuel cells10.1016/j.ijhydene.2020.05.112 ↗
24. Microstructure and electrochemical behavior of layered cathodes for molten carbonate fuel cell
25. An Ag-coated NiO cathode for MCFCs operating at low temperatures10.1149/1.3571532 ↗
26. Electrophoretic deposition of hydrothermally synthesised Ag–TiO2 hybrid nanoparticles onto 3-D Ni filters10.1016/j.matlet.2011.08.098 ↗
27. TiO2 protective coating processed by Atomic Layer Deposition for the improvement of MCFC cathode10.1016/j.ijhydene.2013.07.083 ↗
28. Metallic foam supported electrodes for molten carbonate fuel cells10.1016/j.matdes.2020.108864 ↗
29. Fabrication and characterization of a composite Ni-SDC fuel cell cathode reinforced by Ni foam10.3390/ma15144891 ↗
30. Ag/TiO2 sol prepared by a solgel method and its photocatalytic activity10.1016/j.jpcs.2011.07.025 ↗
31. Nano-titanium oxide doped with gold, silver, and palladium - synthesis and structural characterization10.2478/s11696-014-0537-7 ↗
32. Solubilities of nickel oxide in molten carbonate10.1149/1.2069282 ↗
33. Manufacturing of gamma-LiAlO2 matrix for molten carbonate fuel cell by high-energy milling10.1016/j.ijhydene.2018.02.085 ↗
34. Dual ionic conductive membrane for molten carbonate fuel cell10.1016/j.ijhydene.2018.03.035 ↗
35. Effect of anode porosity on the performance of molten carbonate fuel cell
36. Thermal treatment and properties of Ni-SDC cathode for high temperature fuel cells
37. Engineering performance in applied EPD: Problems and solutions10.1007/s10853-006-0418-8 ↗
38. Optimization of the electrophoretic deposition parameters and mechanism of formation of Ag-TiO2 nanocoatings on a NiTi shape memory alloy: Part I10.3390/coatings14010044 ↗
39. Kinetics of electrophoretic deposition for nanocrystalline zinc oxide coatings10.1111/j.1551-2916.2004.00084.x ↗
40. Preparation of yttria-stabilized zirconia (YSZ) films on La0.85Sr0.15MnO3 (LSM) and LSM-YSZ substrates using an electrophoretic deposition (EPD) process10.1016/S0955-2219(00)00195-3 ↗
41. Electrophoretic deposition of chitosan-based composite coatings for biomedical applications: a review10.1016/j.pmatsci.2019.01.001 ↗
42. Photocatalytic performance of porous TiO2 layers prepared by quantitative electrophoretic deposition from organic solvents10.1016/j.apcatb.2018.01.035 ↗
43. Electrophoretic deposition (EPD) of nanohydroxyapatite - nanosilver coatings on Ti13Zr13Nb alloy10.1016/j.ceramint.2017.06.026 ↗
44. A novel approach to preparing nano-size Co3O4-coated Ni powder by the Pechini method for MCFC cathodes10.1039/b303980c ↗
45. Solubility of cobalt oxide in molten carbonate10.1149/1.2049982 ↗
46. Thin film Pt/TiO2 catalysts for the polymer electrolyte fuel cell10.1016/j.jpowsour.2006.10.005 ↗
47. Effect of LiCoO2-coated cathode on performance of molten carbonate fuel cell10.33961/jecst.2021.00668 ↗