Targeted micro-heterogeneity in bioinks allows for 3D printing of complex constructs with improved resolution and cell viability
Source abstract
Abstract
Abstract Three-dimensional bioprinting is an evolving versatile technique for biomedical applications. Ideal bioinks have complex micro-environment that mimic human tissue, allow for good printing quality and provide high cell viability after printing. Here we present two strategies for enhancing gelatin-based bioinks heterogeneity on a 1–100 µm length scale resulting in superior printing quality and high cell viability. A thorough spatial and micro-mechanical characterization of swollen hydrogel heterogeneity was done using multiple particle tracking microrheology. When poly(vinyl alcohol) is added to homogeneous gelatin gels, viscous inclusions are formed due to micro-phase separation. This phenomenon leads to pronounced slip and superior printing quality of complex 3D constructs as well as high human hepatocellular carcinoma (HepG2) and normal human dermal fibroblast (NHDF) cell viability due to reduced shear damage during extrusion. Similar printability and cell viability results are obtained with gelatin/nanoclay composites. The formation of polymer/nanoclay clusters reduces the critical stress of gel fracture, which facilitates extrusion, thus enhancing printing quality and cell viability. Targeted introduction of micro-heterogeneities in bioinks through micro-phase separation is an effective technique for high resolution 3D printing of complex constructs with high cell viability. The size of the heterogeneities, however, has to be substantially smaller than the desired feature size in order to achieve good printing quality.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: 3D Printing in Biomedical Research · Innovative Microfluidic and Catalytic Techniques Innovation · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Ng · Print me an organ! Why we are not there yet Prog. Polym. Sci. · 2019 · 9710.1016/j.progpolymsci.2019.101145 ↗
2. PVA-based hydrogels for tissue engineering: a review10.1080/00914037.2016.1190930 ↗
3. Li · 3D printing of hydrogels: Rational design strategies and emerging biomedical applications Mater. Sci. Eng. R · 2020 · 14010.1016/j.mser.2020.100543 ↗
4. Recent advances in hydrogels for cartilage tissue engineering10.22203/eCM.v033a05 ↗
5. Interpenetrating polymer network hydrogels based on gelatin and PVA by biocompatible approaches: synthesis and characterization10.1155/2013/328763 ↗
6. Gelatin/PVA scaffolds fabricated using a 3D-printing process employed with a low-temperature plate for hard tissue regeneration: fabrication and characterizations10.1016/j.ijbiomac.2018.07.159 ↗
7. Physically crosslinked polyvinyl alcohol and gelatin interpenetrating polymer network theta-gels for cartilage regeneration10.1039/C5TB00989H ↗
8. Hydrogel bioink reinforcement for additive manufacturing: a focused review of emerging strategies10.1002/adma.201902026 ↗
9. Nanoparticle–hydrogel superstructures for biomedical applications10.1016/j.jconrel.2020.05.041 ↗
10. Bioprinting a synthetic smectic clay for orthopedic applications10.1002/adhm.201900158 ↗
11. Development of a clay based bioink for 3D cell printing for skeletal application10.1088/1758-5090/aa7e96 ↗
12. Potential of Laponite® incorporated oxidized alginate–gelatin ( ADA-GEL ) composite hydrogels for extrusion-based 3D printing10.1002/jbm.b.34771 ↗
13. Advancing bioinks for 3D bioprinting using reactive fillers: a review10.1016/j.actbio.2020.06.040 ↗
14. Printability and cell viability in extrusion-based bioprinting from experimental, computational, and machine learning views10.3390/jfb13020040 ↗
15. Recent advances and challenges in materials for 3D bioprinting10.1016/j.pnsc.2020.09.015 ↗
16. 3D bioprinting of collagen to rebuild components of the human heart10.1126/science.aav9051 ↗
17. Nanoengineered ionic–covalent entanglement (NICE) bioinks for 3D bioprinting10.1021/acsami.7b19808 ↗
18. Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs10.1016/j.mtbio.2019.100008 ↗
19. The cell in the ink: improving biofabrication by printing stem cells for skeletal regenerative medicine10.1016/j.biomaterials.2019.04.009 ↗
20. Heterogeneity is key to hydrogel-based cartilage tissue regeneration10.1039/C7SM00423K ↗
21. Microrheology imaging of fiber suspensions—a case study for lyophilized collagen I in HCl solutions10.1039/D0SM01096K ↗
22. Optical projection tomography technique for image texture and mass transport studies in hydrogels based on gellan gum10.1021/acs.langmuir.6b00554 ↗
23. Taking a deep look: modern microscopy technologies to optimize the design and functionality of biocompatible scaffolds for tissue engineering in regenerative medicine10.1098/rsif.2013.0263 ↗
24. Microrheology and particle tracking in food gels and emulsions10.1016/j.cocis.2013.04.011 ↗
25. Monitoring matrix remodeling in the cellular microenvironment using microrheology for complex cellular systems10.1016/j.actbio.2020.04.053 ↗
26. Multiple particle tracking detects changes in brain extracellular matrix and predicts neurodevelopmental age10.1021/acsnano.1c00394 ↗
27. Microstructure, local viscoelasticity and cell culture suitability of 3D hybrid HA/collagen scaffolds10.1371/journal.pone.0207397 ↗
28. Targeted micro-phase separation—A generic design concept to control the elasticity of extrudable hydrogels10.1016/j.matdes.2023.111803 ↗
29. 3D bioprinting of heterogeneous constructs providing tissue-specific microenvironment based on host–guest modulated dynamic hydrogel bioink for osteochondral regeneration10.1002/adfm.202200710 ↗
30. A review on cell damage, viability, and functionality during 3D bioprinting10.1186/s40779-022-00429-5 ↗
31. Calcium supplementation of bioinks reduces shear stress-induced cell damage during bioprinting10.1088/1758-5090/ac84af ↗
32. Engineering considerations on extrusion-based bioprinting: interactions of material behavior, mechanical forces and cells in the printing needle10.1088/1758-5090/ab7553 ↗
33. Visualization of micro-scale inhomogeneities in acrylic thickener solutions: a multiple particle tracking study10.1016/j.polymer.2014.12.041 ↗
34. Melting and reentrant freezing of two-dimensional colloidal crystals in confined geometry10.1103/PhysRevLett.82.3364 ↗
35. Finite-size effects on the closest packing of hard spheres10.1103/PhysRevLett.79.2348 ↗
36. Methods of digital video microscopy for colloidal studies10.1006/jcis.1996.0217 ↗
37. Estimating the viscoelastic moduli of complex fluids using the generalized Stokes-Einstein equation10.1007/s003970000094 ↗
38. Particle-tracking microrheology of living cells: principles and applications10.1146/annurev.biophys.050708.133724 ↗
39. Optical measurements of frequency-dependent linear viscoelastic moduli of complex fluids10.1103/PhysRevLett.74.1250 ↗
40. Considerations and challenges in studying liquid-liquid phase separation and biomolecular condensates10.1016/j.cell.2018.12.035 ↗
41. Putting the squeeze on phase separation10.1021/jacsau.1c00443 ↗
42. Surface selective binding of nanoclay particles to polyampholyte protein chains10.1063/1.3184803 ↗
43. Effect of ionic strength on shear-thinning nanoclay–polymer composite hydrogels10.1039/C8BM00469B ↗
44. Callister · 2001
45. Superposed shear and compression of strong colloidal gels10.1122/8.0000258 ↗
46. Colloidal gelatin microgels with tunable elasticity support the viability and differentiation of mesenchymal stem cells under pro-inflammatory conditions10.1002/jbm.a.36505 ↗
47. 3D bioprinting of cell-laden hydrogels for improved biological functionality10.1002/adma.202103691 ↗
48. Material extrusion additive manufacturing of dense pastes consisting of macroscopic particles10.1557/s43579-022-00209-1 ↗
49. Engineering and functionalization of gelatin biomaterials: from cell culture to medical applications10.1089/ten.teb.2019.0256 ↗
50. Gelatin: a valuable protein for food and pharmaceutical industries: review10.1080/20014091091904 ↗
51. Effects of processing parameters of 3D bioprinting on the cellular activity of bioinks10.1002/mabi.202000179 ↗