journal article·2023-07-01Open access

Support-less ceramic 3D printing of bioceramic structures using a hydrogel bath

Naren Raja, Honghyun Park, Chang Woo Gal, Aram Sung, Yeong-Jin Choi, Hui-suk Yun

Biofabrication· Volume 15· Issue 3

Abstract

Abstract Volumetric bone tissue defects are beyond the intrinsic regenerative capacity of bone tissue. With the recent development of ceramic 3D printing, various bioceramic scaffolds that can induce bone regeneration are being actively developed. However, hierarchical bone is complex, with overhanging structures that require additional sacrificial support during ceramic 3D printing. Not only can this increase the overall process time and material consumption, but breaks and cracks may occur when sacrificial supports are removed from fabricated ceramic structures. In this study, a support-less ceramic printing (SLCP) process using a hydrogel bath was developed to facilitate the manufacture of complex bone substitutes. A hydrogel bath, consisting of pluronic P123 with temperature-sensitive properties, mechanically supported the fabricated structure when the bioceramic ink was extruded into the bath and promoted the cement reaction to cure the bioceramic. SLCP enables the fabrication of complex bone constructs with overhanging structures, such as the mandible and maxillofacial bones, with reduced overall processing time and material consumption. Scaffolds fabricated by SLCP showed more cell adhesion, higher cell growth rate, and osteogenic protein expression due to their rougher surface than conventionally printed scaffolds. Hybrid scaffolds were fabricated by SLCP to co-print cells and bioceramics, and SLCP provided a cell-friendly environment, exhibiting high cell viability. SLCP enables control of the shape of various cells, bioactive substances, and bioceramics and thus can be used as an innovative 3D bioprinting technique to manufacture complex hierarchical bone structures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Bone substitutes: a review of their characteristics, clinical use, and perspectives for large bone defects management10.1177/2041731418776819 ↗
2. Fabrication of ceramic bone scaffolds by solvent jetting 3D printing and sintering: towards load-bearing applications10.1016/j.addma.2020.101107 ↗
3. High performance hydroxyapatite ceramics and a triply periodic minimum surface structure fabricated by digital light processing 3D printing10.1007/s40145-020-0415-4 ↗
4. Optimization of extrusion based ceramic 3D printing process for complex bony designs10.1016/j.matdes.2018.11.054 ↗
5. Ceramics in orthopaedics10.1302/0301-620X.82B8.0821095 ↗
6. 3D printing of calcium phosphate ceramics for bone tissue engineering and drug delivery10.1007/s10439-016-1678-3 ↗
7. Calcium phosphate ceramic systems in growth factor and drug delivery for bone tissue engineering: a review10.1016/j.actbio.2011.11.017 ↗
8. Low-temperature fabrication of calcium deficient hydroxyapatite bone scaffold by optimization of 3D printing conditions10.1016/j.ceramint.2020.11.051 ↗
9. Effect of porosity and phase composition in 3D printed calcium phosphate scaffolds on bone tissue regeneration in vivo10.1016/j.matdes.2022.110819 ↗
10. Multifunctional calcium-deficient hydroxyl apatite–alginate core–shell-structured bone substitutes as cell and drug delivery vehicles for bone tissue regeneration10.1021/acsbiomaterials.0c01341 ↗
11. Fast and sensitive near-infrared fluorescent probes for ALP detection and 3D printed calcium phosphate scaffold imaging in vivo10.1016/j.bios.2018.01.018 ↗
12. Effect of direct loading of phytoestrogens into the calcium phosphate scaffold on osteoporotic bone tissue regeneration10.1039/C5TB01574J ↗
13. Micellization and gelation of mixed copolymers P123 and F127 in aqueous solution10.1021/la701157j ↗
14. Bioceramics of calcium orthophosphates10.1016/j.biomaterials.2009.11.050 ↗
15. Nanosized and nanocrystalline calcium orthophosphates10.1016/j.actbio.2009.10.031 ↗
16. Effect of ethanol on the formation of calcium phosphates10.1016/0927-7757(95)03450-1 ↗
17. Effect of ethanol on the micellization and gelation of pluronic P12310.1021/la8022425 ↗
18. Mechanically and biologically promoted cell-laden constructs generated using tissue-specific bioinks for tendon/ligament tissue engineering applications10.1088/1758-5090/ac4fb6 ↗
19. A 3D cell printed muscle construct with tissue-derived bioink for the treatment of volumetric muscle loss10.1016/j.biomaterials.2019.03.036 ↗
20. Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels10.1126/sciadv.1500758 ↗
21. 3D cell printed tissue analogues: a new platform for theranostics10.7150/thno.19396 ↗
22. Application of 3D bioprinting in the prevention and the therapy for human diseases10.1038/s41392-021-00566-8 ↗
23. Preparation and characterization of gelatin/α-TCP/SF biocomposite scaffold for bone tissue regeneration10.1016/j.ijbiomac.2017.09.030 ↗
24. Development of glass–ceramic scaffolds for bone tissue engineering: characterisation, proliferation of human osteoblasts and nodule formation10.1016/j.actbio.2006.07.012 ↗
25. Surface functionalization of 3D printed polymer scaffolds to augment stem cell response10.1016/j.matdes.2018.11.018 ↗
26. The effects of combined micron-/submicron-scale surface roughness and nanoscale features on cell proliferation and differentiation10.1016/j.biomaterials.2011.01.029 ↗
27. Function of the bone protein osteocalcin: definitive evidence10.1111/j.1753-4887.1996.tb03798.x ↗
28. Calcium phosphate ceramics in bone tissue engineering: a review of properties and their influence on cell behavior10.1016/j.actbio.2013.06.014 ↗
29. An additive manufacturing‐based PCL–alginate–chondrocyte bioprinted scaffold for cartilage tissue engineering10.1002/term.1682 ↗
30. Development of a 3D cell printed construct considering angiogenesis for liver tissue engineering10.1088/1758-5090/8/1/015007 ↗
31. A simultaneous 3D printing process for the fabrication of bioceramic and cell-laden hydrogel core/shell scaffolds with potential application in bone tissue regeneration10.1039/C6TB00849F ↗
32. An innovative cell-laden α-TCP/collagen scaffold fabricated using a two-step printing process for potential application in regenerating hard tissues10.1038/s41598-016-0028-x ↗