Dynamic Recrystallization Critical Conditions and a Physically–Based Constitutive Model of Al–4.8Mg Alloy Under Hot Working Conditions
Source abstract
Abstract
The microstructure evolution and the mechanical behavior of Al–4.8Mg alloy were investigated by means of isothermal compression tests at various temperatures (280–520 °C) and strain rates (0.01–10 s−1). The results shown that there are three main mechanisms of dynamic softening of samples within the range of selected process parameters: dynamic recovery, dynamic recovery + dynamic recrystallization, and dynamic recrystallization, and the equiaxed dynamic recrystallization grain tends to be formed under higher temperature and higher strain rate. In order to accurately describe the dynamic recrystallization condition of Al-4.8Mg alloy under a wide range of hot deformation parameters, an improved dynamic recrystallization critical conditions model is proposed based on deformation activation energy and work-hardening rate. Additionally, a two–stage physically constitutive model considering the influence of work hardening–dynamic recovery and dynamic recrystallization is established. Comparisons between the predicted and experimental data indicate that the proposed model can adequately predict the flow stress in the range of selected process parameters with the average absolute relative error of 4.02%.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Central South University, Changsha 410083, China
Guangxi Liuzhou Yinhai Aluminum Co., Ltd., Liuzhou 545006, China
References (27)
Show source-provided references
1. The influence of sensitization and corrosion on creep of 5083–H11610.1016/j.corsci.2018.07.036 ↗
2. Superplastic deformation mechanisms in fine–grained Al–Mg based alloys10.1016/j.msea.2014.12.099 ↗
3. Control of second-phase particles in the Al-Mg-Mn alloy AA 508310.1016/j.jallcom.2016.08.070 ↗
4. Effect of homogenization on the corrosion behavior of 5083–H321 aluminum alloy10.1016/j.jallcom.2016.02.228 ↗
5. Hot−compression behavior of Al alloy 518210.1007/s11771-012-1247-3 ↗
6. The effect of heat treatment on hot deformation behaviour of Al 202410.1016/j.jmatprotec.2007.11.261 ↗
7. Hot deformation mechanisms of a solution–treated Al–Li–Cu–Mg–Zr alloy10.1007/BF02595440 ↗
8. Hot deformation behavior and processing map of a new type Al–Zn–Mg–Er–Zr alloy10.1016/j.jallcom.2016.06.254 ↗
9. Hot deformation behavior of the new Al–Mg–Si–Cu aluminum alloy during compression at elevated temperatures10.1016/j.matchar.2006.04.012 ↗
10. Deformation characteristics and strain–compensated constitutive equation for AA5083 aluminum alloy under hot compression10.1016/S1003-6326(19)65131-9 ↗
11. Hot deformation behavior and constitutive modeling of homogenized 6026 aluminum alloy10.1016/j.matdes.2015.02.024 ↗
12. Flow behavior modeling of the 7050 aluminum alloy at elevated temperatures considering the compensation of strain10.1016/j.matdes.2012.06.032 ↗
13. Xiao, Z.B., Huang, Y.C., Liu, H.S., and Wang, X. (2016). Hot tensile and fracture behavior of 35CrMo steel at elevated temperature and strain rate. Metals, 6.10.3390/met6090210 ↗
14. Constitutive model for elevated temperature flow stress of AZ41M magnesium alloy considering the compensation of strain10.1016/j.jallcom.2015.06.257 ↗
15. The research on the constitutive modeling and hot working characteristics of as–cast V–5Cr–5Ti alloy during hot10.1016/j.jallcom.2015.12.014 ↗
16. Processing maps for the Cu–Cr–Zr–Y alloy hot deformation behavior10.1016/j.msea.2016.03.033 ↗
17. Constitutive equation and hot deformation behavior of homogenized Al–7.68Zn–2.12Mg–1.98Cu–0.12Zr alloy during compression at elevated temperature10.1016/j.msea.2014.04.055 ↗
18. The flow behavior and constitutive equations in isothermal compression of 7050 aluminum alloy10.1016/j.msea.2012.02.035 ↗
19. A physical–based constitutive relation to predict flow stress for Cu–0.4Mg alloy during hot working10.1016/j.msea.2014.07.082 ↗
20. A physically–based constitutive model for a typical nickel–based superalloy10.1016/j.commatsci.2013.11.003 ↗
21. A physical-based constitutive model to describe the strain-hardening and dynamic recovery behaviors of 5754 aluminum alloy10.1016/j.msea.2017.04.086 ↗
22. Dynamic restoration mechanism and physically based constitutive model of 2050 Al–Li alloy during hot compression10.1016/j.jallcom.2015.07.182 ↗
23. The back stress in high temperature deformation10.1016/0001-6160(69)90020-0 ↗
24. Continuous dynamic recrystallization and discontinuous dynamic recrystallization in 99.99% polycrystalline aluminum during hot compression
25. Hot deformation behavior of AA7085 aluminum alloy during isothermal compression at elevated temperature10.1016/j.msea.2013.12.012 ↗
26. Constitutive Model Based on Dynamic Recrystallization Behavior during Thermal Deformation of a Nickel-Based Superalloy10.3390/met6070161 ↗
27. Modelling of Microstructure and Properties-1410.1016/B978-075068084-4/50016-9 ↗