journal article·2023-06-11Open access

Microstructural Evolution and Mechanical Properties of SiC/Al-40Si Composites Fabricated by High Pressure Solidification

Rong Zhang, Chunming Zou, Zunjie Wei, Hongwei Wang

Materials· Volume 16· Issue 12

Abstract

The microstructure and mechanical properties of SiC/Al-40Si composites prepared under high pressure were studied. As the pressure increases from 1 atm to 3 GPa, the primary Si phase in the Al-40Si alloy is refined. With increasing pressure, the composition of the eutectic point increases, the solute diffusion coefficient decreases exponentially, and the concentration of Si solute at the front of the solid–liquid interface of the primary Si is low, which contributes to the refining of the primary Si and inhibiting its faceted growth. The bending strength of SiC/Al-40Si composite prepared under 3 GPa was 334 MPa, which was 66% higher compared to the Al-40Si alloy prepared under the same pressure.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Fujian University of Technology, Fuzhou 350118, China

School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China

Funding

National Natural Science Foundation of China · Natural Science Foundation of Fujian Province · Scientific Research Foundation of Fujian University of Technology · “Head Goose” team project · Foundation of National Key Laboratory for Precision Hot Processing of Metals

References (36)

Show source-provided references
1. On the characterization of microstructure and fracture in a high-pressure die-casting Al-10 wt% Si alloy10.1016/j.pnsc.2019.04.008 ↗
2. Microstructural evolution, segregation and fracture behavior of A390 alloy prepared by combined Rheo-HPDC processing and Sr-modifier10.1016/j.jallcom.2020.155297 ↗
3. Microstructure and thermal expansion behavior of Al-50Si synthesized by selective laser melting10.1016/j.jallcom.2016.12.429 ↗
4. The influence on microstructure and wear behavior of hypereutectic Al-50Si alloy with various Cu-P admixture contents and cooling rates10.1088/2051-672X/ab337d ↗
5. The evolution on the microstructure and thermal expansion behavior of Al–50Si alloy with different P contents10.1007/s10854-019-00990-1 ↗
6. Lambourne, A. (2007). Spray Forming of Si-Al Alloys for Thermal Management Applications, University of Oxford.
7. Precipitation behavior and properties of Al–50Si–0.5X (X = Sc, La, Nb) alloys10.1007/s10854-022-07851-4 ↗
8. Effects of particle size and its distribution homogenization on the microstructure and mechanical properties of SiC/Al-30Si alloy composite10.1016/j.powtec.2013.03.054 ↗
9. Al2O3 nanoparticles induced simultaneous refinement and modification of primary and eutectic Si particles in hypereutectic Al–20Si alloy10.1016/j.msea.2012.01.131 ↗
10. Microstructure and thermal expansion behavior of spray-deposited Al-50Si10.1016/j.matdes.2013.12.066 ↗
11. High-temperature mechanical properties and thermal cycling stability of Al-50Si alloy for electronic packaging10.1016/j.msea.2018.05.020 ↗
12. Microstructure and properties of Al-60wt.%Si composites prepared by powder semi-solid squeeze10.1016/j.powtec.2018.11.011 ↗
13. Developments in the aluminum metal matrix composites reinforced by micro/nano particles—A review10.1177/0021998319865307 ↗
14. Microstructure and properties of Sip/Al-20wt% Si composite prepared by hot-pressed sintering technology10.1007/s10853-013-7821-8 ↗
15. Pressure induced nanoparticle phase behavior, property, and applications10.1021/acs.chemrev.9b00023 ↗
16. Materials discovery at high pressures
17. A perspective on conventional high-temperature superconductors at high pressure: Methods and materials10.1016/j.physrep.2020.02.003 ↗
18. Chemistry at high pressure10.1039/b610410j ↗
19. New materials from high pressure experiments: Challenges and opportunities10.1080/0895795031000109733 ↗
20. New materials from high-pressure experiments10.1038/nmat716 ↗
21. Nanomaterials under high-pressure10.1039/b517779k ↗
22. Chemical bonding at high pressure
23. Interconnected SiC–Si network reinforced Al–20Si composites fabricated by high pressure solidification10.1016/j.ceramint.2020.09.208 ↗
24. Effects of high pressure and SiC content on microstructure and precipitation kinetics of Al-20Si alloy10.1016/j.jallcom.2013.10.128 ↗
25. The effects of high pressure and superheating on the planar growth of Al3Ni phase in hypo-peritectic Al-30wt% Ni alloy10.1016/j.jallcom.2018.09.079 ↗
26. Effects of high pressure and superheat temperature on microstructure evolution of Al-20Si alloy10.1016/j.jmrt.2020.08.040 ↗
27. Zhang, R., Zou, C., Wei, Z., and Wang, H. (2021). Effect of High Pressure and Temperature on the Evolution of Si Phase and Eutectic Spacing in Al-20Si Alloys. Crystals, 11.10.3390/cryst11060705 ↗
28. In situ formation of SiC in Al–40Si alloy during high-pressure solidification10.1016/j.ceramint.2021.05.164 ↗
29. Non-equilibrium microstructure of hyper-eutectic Al-Si alloy solidified under superhigh pressure10.1023/A:1004665728963 ↗
30. Density and thermal expansion of liquid Al–Si alloys10.1007/s10853-011-6219-8 ↗
31. Solute redistribution during planar growth of intermetallic compound with nil solubility10.1016/j.intermet.2012.02.024 ↗
32. Effect of pressure on solidification of metallic materials10.1179/1743133611Y.0000000016 ↗
33. Influence of fraction of high angle boundaries on the mechanical behavior of an ultrafine grained Al-Mg alloy10.1016/j.msea.2010.04.086 ↗
34. Microstructural evolution and mechanical properties of Al–Si–Cu–(Ge)–(Mg) alloy solidified under high pressure10.1016/j.msea.2021.142065 ↗
35. Thermal expansion coefficient of 3C-SiC10.1063/1.115227 ↗
36. Meredith, P.G. (1990). Deformation Processes in Minerals, Ceramics and Rocks, Springer.