journal article·2022-11-24Open access

Influence of Mo on Ni-15Cr Cladding Layers via Plasma Transferred Arc

Peiran Shi, Hang Yin, Yichen Zhou, Guodong Zhang

Materials· Volume 15· Issue 23

Abstract

The composite Ni-Cr-Mo covering layers with excellent corrosion and wear resistance are deposited by plasma transferred arc (PTA), which can improve the service life of ships and solve the corrosion and wear problems of mechanized boats. The effects of Mo on the microstructure, hardness and corrosion resistance of covering layers were analyzed by OM, SEM, XRD, EDS, a micro hardness test, a friction test and a corrosion-resistance test. The results show that the structure of covering layers change and the austenite precipitates become granular with an increase of Mo content. In addition, the corrosion and wear resistance of covering layers are improved and the sample with 5% content of Mo has the best wear and corrosion resistance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072, China

Funding

Hubei Provincial Natural Science Foundation of China

References (24)

Show source-provided references
1. Field studies of corrosion behaviour of copper alloys in natural seawater10.1016/j.corsci.2013.07.019 ↗
2. Corrosion Protection Technology of Steel Structure in Marine Environment10.4028/www.scientific.net/AMM.744-746.29 ↗
3. Enhanced corrosion resistance of Ti-5 wt.% TiN composite compared to commercial pure Ti produced by selective laser melting in HCl solution10.1016/j.jallcom.2019.153422 ↗
4. The effect of polymeric protective layers and the immersion time on the corrosion behavior of naval steel in natural seawater10.1016/j.jmrt.2020.09.059 ↗
5. The influence of length of alkyl chain on the chemical structure and corrosion resistance of silica-polyacrylic hybrid coatings on structural steel10.1016/j.porgcoat.2020.105982 ↗
6. Ni60-SiC coating prepared by plasma spraying, plasma re-melting and plasma spray welding on surface of hot forging die10.1007/s11595-011-0299-9 ↗
7. Corrosion behavior of Hastelloy C22 coating produced by laser cladding in static and cavitation acid solution10.1016/S1003-6326(14)63232-5 ↗
8. A study of nickel-based corrosion resisting alloy layer obtained by double glow plasma surface alloying technique10.1016/S0257-8972(00)00818-5 ↗
9. Microstructures and properties of Ni based composite coatings prepared by plasma spray welding with mixed powders10.1016/j.ijrmhm.2015.05.011 ↗
10. Evaluation of corrosion resistance and characterization of Ni-Cr coated structure using plasma spray coating for marine hulls10.1007/s11468-018-0838-8 ↗
11. Evaluation of corrosion protection performance of electroplated zinc and zinc-graphene oxide nanocomposite coatings in air saturated 3.5 wt.% NaCl solution10.1016/j.colsurfa.2020.125051 ↗
12. Kim, M., Kang, J., Kim, J., and Kim, J. (2022). Corrosion Protection Oxide Scale Formed on Surface of Fe-Ni-M (M = Al, Cr, Cu) Inert Anode for Molten Salt Electrolysis. Materials, 18.10.3390/ma15030719 ↗
13. Microstructure and fretting wear resistance of γ/TiC composite coating in situ fabricated by plasma transferred arc cladding10.1016/j.surfcoat.2013.11.012 ↗
14. Laser cladding of iron-based erosion resistant metal matrix composites10.1016/j.jmapro.2019.01.001 ↗
15. Manufacture and repair of propeller shafts and rotating parts using plasma technology10.1080/09507110009549142 ↗
16. Influence of Cr content on the microstructure and electrochemical corrosion in plasma cladding Ni-Cr coatings10.1007/s11661-019-05440-5 ↗
17. Microstructure and properties of NiCrBSi coating by plasma cladding on gray cast iron10.1016/j.surfcoat.2018.12.055 ↗
18. Repair of Ni-based single-crystal superalloys using vacuum plasma spray10.1016/j.matdes.2019.107656 ↗
19. A Review on the Nickel Based Metal Matrix Composite Coating10.1007/s12540-020-00872-w ↗
20. Tribological properties of Ni-base alloy composite coating modified by both graphite and TiC particles
21. Microstructures and properties of in-situ TiC particles reinforced Ni-based composite coatings prepared by plasma spray welding10.1016/j.ceramint.2015.06.041 ↗
22. La doping inhibits stress production at the grain boundaries in Ni–WC coating10.1016/j.jallcom.2018.04.269 ↗
23. Tribological properties of adaptive Ni-Based composites with addition of lubricious Ag2MoO4 at elevated temperatures10.1007/s11249-012-9958-z ↗
24. Improvement of Ni–Cr–Mo coating performance by laser cladding combined re-melting10.1016/j.apsusc.2014.04.156 ↗