Effect of Cu/Li Ratio on Mechanical Properties and Corrosion Behavior of Sc-Containing Al-Cu-Li Alloys

In this work, the effects of the Cu/Li ratio on the mechanical properties and corrosion behavior of Sc-containing Al-Cu-Li alloys were systematically investigated by utilizing age-hardening behavior, tensile property, corrosion behavior, and electrochemical behavior, complemented by microstructural characterization through EBSD and TEM. The results show that the peak aging strength of the alloys remained relatively consistent but slightly decreased with the decrease in Cu/Li ratio, and the yield strengths were 585 MPa, 578 MPa, and 573 MPa, respectively. The changes in the Cu/Li ratio caused different matching patterns of precipitates in the peak aging alloys. The cumulative precipitation strengthening by T1, θ′, δ′, and S′ phases are equal within the alloys with different Cu/Li ratios. However, the strength contribution of the T1 phase decreases from 81% to 66% with the decrease in the Cu/Li ratio. Concurrently, the precipitates of LAGBs gradually increase in number and are continuously distributed, and the precipitates of HAGBs become larger in size with lower Cu content as the Cu/Li ratio decreases, all of which leads to a weakening of the intergranular corrosion (IGC) resistance within the low Cu/Li ratio alloy.