Isomerization of C₇ and C₈ through Ionic Liquids Supported by a Fe/SBA-15 Catalyst

Isomerization is extensively utilized in the petroleum industry, and this study demonstrates an energy-efficient process utilizing an ionic liquid catalyst. 1-Ethyl-3-methylimidazolium triflate [Emim][TFO] as an ionic liquid was immobilized on solid support Fe/SBA-15. Variants of the catalyst were developed with the Fe constant at 5% and different ratios of ionic liquid. In the catalyst Fe/[Emim][TFO]/SBA-15, the metal Fe was loaded via the impregnation method, and subsequently, the ionic liquid variants Fe/[Emim][TFO](10)/SBA-15, Fe/[Emim][TFO](20)/SBA-15, and Fe/[Emim][TFO](30)/SBA-15 were synthesized. The physical properties of the synthesized catalyst were studied using standard characteristic techniques. The process performance was studied for variants of each parameter, which include temperature, hydrogen flow rate, pressure, and weight hourly space velocity. The iso-products of n -heptane and n -octane were obtained with an appreciable conversion of >90% and a selectivity of >95% with the catalyst Fe/[Emim][TFO](20)/SBA-15 among the other synthesized catalysts. The process yielded a high quantum of iso-products with negligible cracked products at a low temperature of 140 °C. The catalyst Fe/[Emim][TFO](20)/SBA-15 at 140 °C delivered the highest yield of iso-alkanes among the three catalysts. Iso-alkanes are instrumental tools for increasing the octane number of a fuel. This study delivers high iso-alkane content fuel, which can provide the best anti knock capability and enhance fuel efficiency for the life of modern high-powered engines. The results demonstrate a process that is energy-efficient, economic, and environmentally friendly.