Fiber‐Particle Composite Binder Enabled Feasibly Dry‐Processed Ultrahigh‐Nickel Cathode Film for All‐Solid‐State Lithium Batteries

Cathodes play a critical role in determining the performance of all‐solid‐state lithium batteries (ASSLBs). Traditional dry‐processed cathode based on only fibrous binder suffers from limited binder fibrillation and loose contact between solid particles inside. Herein, a fiber‐particle composite binder is employed to fabricate a dry‐processed cathode comprising single‐crystal LiNi _0.92 Co _0.05 Mn _0.03 O ₂ (S‐NCM92) and Li ₃ InCl ₆ (LIC). The incorporation of 1.5 wt% polytetrafluoroethylene (PTFE) particles and 1 wt% PTFE fibers promotes interparticle contact, thereby enhancing the mechanical adhesion among solid components. As the result, the optimized dry‐processed cathode shows a marked improvement in rate capability and cycling stability. Moreover, the dry‐processed cathode with fiber‐particle composite binder enables a pouch cell with a capacity of 10.89 mAh to exhibit 68.8% capacity retention after 80 cycles under a stack pressure of 31.25 MPa. The cell maintains electrochemical function after cutting, demonstrating its safety and reliability. These results underscore the practicality of the fiber‐particle composite binder strategy to fabricate high‐quality cathodes for ASSLBs.