Pre-Lithiation Strategies for Rechargeable Energy Storage Technologies: Concepts, Promises and Challenges
Source abstract
Abstract
In order to meet the sophisticated demands for large-scale applications such as electro-mobility, next generation energy storage technologies require advanced electrode active materials with enhanced gravimetric and volumetric capacities to achieve increased gravimetric energy and volumetric energy densities. However, most of these materials suffer from high 1st cycle active lithium losses, e.g., caused by solid electrolyte interphase (SEI) formation, which in turn hinder their broad commercial use so far. In general, the loss of active lithium permanently decreases the available energy by the consumption of lithium from the positive electrode material. Pre-lithiation is considered as a highly appealing technique to compensate for active lithium losses and, therefore, to increase the practical energy density. Various pre-lithiation techniques have been evaluated so far, including electrochemical and chemical pre-lithiation, pre-lithiation with the help of additives or the pre-lithiation by direct contact to lithium metal. In this review article, we will give a comprehensive overview about the various concepts for pre lithiation and controversially discuss their advantages and challenges. Furthermore, we will critically discuss possible effects on the cell performance and stability and assess the techniques with regard to their possible commercial exploration.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Münster, MEET Battery Research Center, Institute of Physical Chemistry, Corrensstraße 46, 48149 Münster, Germany
Helmholtz Institute Münster, IEK-12, Forschungszentrum Jülich, Corrensstraße 46, 48149 Münster, Germany
Funding
German Federal Ministry of Education and Research (BMBF) · German Federal Ministry for Economic Affairs and Energy (BMWi)
References (100+)
Show source-provided references
1. Future Generations of Cathode Materials: An Automotive Industry Perspective10.1039/C5TA00361J ↗
2. Lithium Ion, Lithium Metal, and Alternative Rechargeable Battery Technologies: The Odyssey for High Energy Density10.1007/s10008-017-3610-7 ↗
3. The Development and Future of Lithium Ion Batteries10.1149/2.0251701jes ↗
4. The Energy-Storage Frontier: Lithium-Ion Batteries and Beyond10.1557/mrs.2015.259 ↗
5. Current Research Trends and Prospects among the Various Materials and Designs Used in Lithium-Based Batteries10.1007/s10800-013-0533-6 ↗
6. Best Practice: Performance and Cost Evaluation of Lithium Ion Battery Active Materials with Special Emphasis on Energy Efficiency10.1021/acs.chemmater.6b02895 ↗
7. Odyssey of Multivalent Cathode Materials: Open Questions and Future Challenges10.1021/acs.chemrev.6b00614 ↗
8. Alternative Electrochemical Energy Storage: Potassium-Based Dual-Graphite Batteries10.1039/C7EE01535F ↗
9. Sodium-Ion Batteries: Present and Future10.1039/C6CS00776G ↗
10. Towards a Calcium-Based Rechargeable Battery10.1038/nmat4462 ↗
11. Advances in Battery Technology: Rechargeable Magnesium Batteries and Novel Negative-Electrode Materials for Lithium Ion Batteries10.1002/1439-7641(20020215)3:2<155::AID-CPHC155>3.0.CO;2-S ↗
12. Ageing Mechanisms in Lithium-Ion Batteries10.1016/j.jpowsour.2005.01.006 ↗
13. Aging Mechanisms of Lithium Cathode Materials10.1016/j.jpowsour.2003.09.034 ↗
14. Challenges Considering the Degradation of Cell Components in Commercial Lithium-Ion Cells: A Review and Evaluation of Present Systems10.1007/s41061-017-0139-2 ↗
15. The Solid Electrolyte Interphase—The Most Important and the Least Understood Solid Electrolyte in Rechargeable Li Batteries10.1524/zpch.2009.6086 ↗
16. A Review of the Features and Analyses of the Solid Electrolyte Interphase in Li-Ion Batteries10.1016/j.electacta.2010.05.072 ↗
17. The State of Understanding of the Lithium-Ion-Battery Graphite Solid Electrolyte Interphase (SEI) and its Relationship to Formation Cycling10.1016/j.carbon.2016.04.008 ↗
18. Solid Electrolyte Interphase Growth and Capacity Loss in Silicon Electrodes10.1021/jacs.6b02882 ↗
19. The Mechanism of SEI Formation on Single Crystal Si(100), Si(110) and Si(111) Electrodes10.1149/2.0361512jes ↗
20. Running Out of Lithium? A Route to Differentiate between Capacity Losses and Active Lithium Losses in Lithium-Ion Batteries10.1039/C7CP05405J ↗
21. Graphites for Lithium-Ion Cells: The Correlation of the First-Cycle Charge Loss with the Brunauer-Emmett-Teller Surface Area10.1149/1.1838281 ↗
22. Influence of Graphite Surface Modifications on the Ratio of Basal Plane to “Non-Basal Plane” Surface Area and on the Anode Performance in Lithium Ion Batteries10.1016/j.jpowsour.2011.10.085 ↗
23. Determination of the Absolute and Relative Extents of Basal Plane Surface Area and “Non-Basal Plane Surface” Area of Graphites and their Impact on Anode Performance in Lithium Ion Batteries10.1016/S0378-7753(01)00527-4 ↗
24. A Study on Electrolyte Interactions with Graphite Anodes Exhibiting Structures with Various Amounts of Rhombohedral Phase10.1016/S0378-7753(03)00278-7 ↗
25. Silicon Based Lithium-Ion Battery Anodes: A Chronicle Perspective Review10.1016/j.nanoen.2016.11.013 ↗
26. Alloy Negative Electrodes for Li-Ion Batteries10.1021/cr500207g ↗
27. Studies on the Anode/Electrolyte Interface in Lithium Ion Batteries10.1007/s007060170110 ↗
28. How Do Reactions at the Anode/Electrolyte Interface Determine the Cathode Performance in Lithium-Ion Batteries?10.1149/2.022304jes ↗
29. Best Practices for Mitigating Irreversible Capacity Loss of Negative Electrodes in Li-Ion Batteries10.1002/aenm.201602607 ↗
30. Controlled Prelithiation of Silicon Monoxide for High Performance Lithium-Ion Rechargeable Full Cells10.1021/acs.nanolett.5b03776 ↗
31. Prelithiation of Silicon-Carbon Nanotube Anodes for Lithium Ion Batteries by Stabilized Lithium Metal Powder (SLMP)10.1021/nl401776d ↗
32. Dry-Air-Stable Lithium Silicide-Lithium Oxide Core-Shell Nanoparticles as High-Capacity Prelithiation Reagents10.1038/ncomms6088 ↗
33. Toward Practical Application of Functional Conductive Polymer Binder for a High-Energy Lithium-Ion Battery Design10.1021/nl503490h ↗
34. Comparison between Na-Ion and Li-Ion Cells: Understanding the Critical Role of the Cathodes Stability and the Anodes Pretreatment on the Cells Behavior10.1021/acsami.5b09835 ↗
35. Al2O3 Coating on Anode Surface in Lithium Ion Batteries: Impact on Low Temperature Cycling and Safety Behavior10.1016/j.jpowsour.2017.07.062 ↗
36. In Situ Detection of Lithium Metal Plating on Graphite in Experimental Cells10.1016/j.jpowsour.2015.01.046 ↗
37. Understanding Undesirable Anode Lithium Plating Issues in Lithium-Ion Batteries10.1039/C6RA19482F ↗
38. Cyclable Lithium and Capacity Loss in Li-Ion Cells10.1149/1.1870752 ↗
39. A Comprehensive Understanding of Electrode Thickness Effects on the Electrochemical Performances of Li-Ion Battery Cathodes10.1016/j.electacta.2012.03.161 ↗
40. Toward Pre-Lithiated High Areal Capacity Silicon Anodes for Lithium-Ion Batteries10.1016/j.electacta.2016.03.139 ↗
41. Electrochemical Performance of Lithium-Ion Capacitors Using Pre-Lithiated Multiwalled Carbon Nanotubes as Anode10.1142/S1793292017500515 ↗
42. Effect of Pre-Lithiation Degrees of Mesocarbon Microbeads Anode on the Electrochemical Performance of Lithium-Ion Capacitors10.1016/j.electacta.2014.01.040 ↗
43. Effect of Mechanical Pre-Lithiation on Electrochemical Performance of Silicon Negative Electrode for Lithium-Ion Batteries10.1149/2.1361707jes ↗
44. Multiscale Analysis of Prelithiated Silicon Nanowire for Li-Ion Battery10.1016/j.commatsci.2014.11.001 ↗
45. Application of Stabilized Lithium Metal Powder (SLMP®) in Graphite Anode—A High Efficient Prelithiation Method for Lithium-Ion Batteries10.1016/j.jpowsour.2014.02.112 ↗
46. Investigations on Novel Electrolytes, Solvents and SEI Additives for use in Lithium-Ion Batteries: Systematic Electrochemical Characterization and Detailed Analysis by Spectroscopic Methods10.1016/j.progsolidstchem.2014.04.003 ↗
47. Synergistic Effect of Blended Components in Nonaqueous Electrolytes for Lithium Ion Batteries10.1007/s41061-017-0125-8 ↗
48. Chemical Formation of a Solid Electrolyte Interface on the Carbon Electrode of a Li-Ion Cell10.1149/1.1838511 ↗
49. Li-Doping Process for LixSiO-Negative Active Material Synthesized by Chemical Method for Lithium-Ion Cells10.1016/j.jpowsour.2005.03.100 ↗
50. Mechanism of Li-Doping into Li4Ti5O12 Negative Active Material for Li-Ion Cells by New Chemical Method10.1016/j.jpowsour.2005.03.237 ↗
51. Improvement of Cycle Behaviour of SiO/C Anode Composite by Thermochemically Generated Li4SiO4 Inert Phase for Lithium Batteries10.1016/j.jpowsour.2008.11.137 ↗
52. Electrochemical Properties of a SiOx Film Anode Pre-Lithiated by Evaporation of Metallic Li in Li-Ion Batteries10.1246/cl.170556 ↗
53. Electrochemical Performance of Li- and Mn-Rich Cathodes in Full Cells with Prelithiated Graphite Negative Electrodes10.1021/acsenergylett.7b00007 ↗
54. Hybrid Lithium-Ion Capacitors with Asymmetric Graphene Electrodes10.1039/C7TA01113J ↗
55. High Performance Asymmetric V2O5-SnO2 Nanopore Battery by Atomic Layer Deposition10.1039/C7NR02151H ↗
56. A Tutorial into Practical Capacity and Mass Balancing of Lithium Ion Batteries10.1149/2.0961712jes ↗
57. Lithiated Carbons
58. Li-Metal-Free Prelithiation of Si-Based Negative Electrodes for Full Li-Ion Batteries10.1002/cssc.201500287 ↗
59. Grant, R.W., Sweetland, M., Acharige, A.M., and Wohl, R. (2017). Phased Introduction of Lithium into the Pre-Lithiated Anode of a Lithium Ion Electrochemical Cell. (9,748,599 B2), U.S. Patent.
60. Grant, R.W., Sweetland, M., and Acharige, A.M. (2017). Method for Alkaliating Anodes. (US9,598,789 B2), U.S. Patent.
61. Grant, R.W., Sweetland, M., and Acharige, A.M. (2017). Methods for Alkaliating Roll Anodes. (20,170,187,030 A1), U.S. Patent.
62. Pre-Lithiation of Carbon Anodes Using Different Lithium–Sources10.1149/07711.0293ecst ↗
63. Prelithiated Silicon Nanowires as an Anode for Lithium Ion Batteries10.1021/nn2017167 ↗
64. Hard Carbon/Lithium Composite Anode Materials for Li-Ion Batteries10.1016/j.electacta.2006.12.012 ↗
65. Graphene Oxide Involved Air-Controlled Electrospray for Uniform, Fast, Instantly Dry, and Binder-Free Electrode Fabrication10.1021/acsami.7b00087 ↗
66. Pre-Lithiation of Onion-like Carbon/MoS2 Nano-Urchin Anodes for High-Performance Rechargeable Lithium Ion Batteries10.1039/C4NR01553C ↗
67. A Prelithiated Carbon Anode for Lithium-Ion Battery Applications10.1016/j.jpowsour.2005.07.051 ↗
68. A Lithium Ion Cell Containing a Non-Lithiated Cathode10.1016/j.jpowsour.2005.03.023 ↗
69. Coated Lithium Powder (CLiP) Electrodes for Lithium-Metal Batteries10.1002/aenm.201300815 ↗
70. Using Polyisobutylene as a Non-Fluorinated Binder for Coated Lithium Powder (CLiP) Electrodes10.1016/j.electacta.2014.06.128 ↗
71. Effective Enhancement of Lithium-Ion Battery Performance Using SLMP10.1016/j.elecom.2011.04.003 ↗
72. Electromechanical Probing of Li/Li2CO3 Core/Shell Particles in a TEM10.1149/2.018303jes ↗
73. Electrochemical Behavior of a Lithium-Pre-Doped Carbon-Coated Silicon Monoxide Anode Cell10.1016/j.jpowsour.2008.11.029 ↗
74. Improved Electrochemical Performance of Micro-Sized SiO-Based Composite Anode by Prelithiation of Stabilized Lithium Metal Powder10.1016/j.jpowsour.2017.02.061 ↗
75. Silicon Carboxylate Derived Silicon Oxycarbides as Anodes for Lithium Ion Batteries10.1039/C7TA01843F ↗
76. SBR-PVDF Based Binder for the Application of SLMP in Graphite Anodes10.1039/c3ra42773k ↗
77. Scalable Process for Application of Stabilized Lithium Metal Powder in Li-Ion Batteries10.1016/j.jpowsour.2016.01.061 ↗
78. Critical Roles of Binders and Formulation at Multiscales of Silicon-Based Composite Electrodes10.1016/j.jpowsour.2015.01.140 ↗
79. Encapsulation of Alpha-Fe2O3 Nanoparticles in Graphitic Carbon Microspheres as High-Performance Anode Materials for Lithium-Ion Batteries10.1039/C4NR06771A ↗
80. Amorphous Hierarchical Porous GeOx as High-Capacity Anodes for Li Ion Batteries with Very Long Cycling Life10.1021/ja208880f ↗
81. Mitigation of the Irreversible Capacity and Electrolyte Decomposition in a LiNi0.5Mn1.5O4/Nano-TiO2 Li-Ion Battery10.1016/j.jpowsour.2011.08.022 ↗
82. An All-Solid-State Li-Ion Battery with a Pre-Lithiated Si-Ti-Ni Alloy Anode10.1149/2.086309jes ↗
83. In Situ Synchrotron Wide-Angle X-ray Scattering Study on Rapid Lithiation of Graphite Anode via Direct Contact Method for Li-Ion Capacitors10.1016/j.jpowsour.2015.01.193 ↗
84. High Performance Li-Ion Capacitor Laminate Cells Based on Hard Carbon/Lithium Stripes Negative Electrodes10.1149/2.0351702jes ↗
85. Constructing High Energy and Power Densities Li-Ion Capacitors Using Li Thin Film for Pre-Lithiation10.1149/2.1701709jes ↗
86. Schmuch, R., Wagner, R., Hörpel, G., Placke, T., and Winter, M. (2018). Performance and Cost of Materials for Lithium-Based Rechargeable Automotive Batteries. Nat. Energy, accepted.10.1038/s41560-018-0107-2 ↗
87. Reaction Mechanisms of Li2.6Co0.4N Anode Material10.1016/S0167-2738(99)00038-7 ↗
88. Layered Lithium Transition Metal Nitrides as Novel Anodes for Lithium Secondary Batteries10.1016/j.electacta.2004.03.019 ↗
89. Electrochemical Behavior of the Composite Anodes Consisting of Carbonaceous Materials and Lithium Transition-Metal Nitrides for Lithium-Ion Batteries10.1016/j.ssi.2007.12.077 ↗
90. Electrochemical Characterizations of Li2.6Co0.4N/Graphite Anodes for Lithium Ion Batteries10.1016/j.matlet.2008.11.036 ↗
91. Hard Carbon/Li2.6Co0.4N Composite Anode Materials for Li-Ion Batteries10.1016/j.ssi.2006.06.029 ↗
92. Electrochemical Characterization of a Novel Si-Graphite-Li2.6Co0.4N Composite as Anode Material for Lithium Secondary Batteries10.1016/j.matchemphys.2004.08.032 ↗
93. Novel Composite Anodes Based on Nano-Oxides and Li2.6Co0.4N for Lithium Ion Batteries10.1016/S0013-4686(01)00474-1 ↗
94. Composite Anode Containing Nano-SiO1.1 and Li2.6Co0.4N with Solid PEO Electrolytes for Lithium-Ion Batteries10.1016/j.jpowsour.2005.03.022 ↗
95. New Composite Anode Systems Combined with Li2.6Co0.4N10.1016/S0378-7753(01)00509-2 ↗
96. Morphology Modification and Irreversibility Compensation for SnO Anodes10.1016/S0378-7753(01)00543-2 ↗
97. SnSbx-Based Composite Electrodes for Lithium Ion Cells10.1016/S0167-2738(00)00361-1 ↗
98. High-Capacity Composite Anodes with SnSb and Li2.6Co0.4N for Solid Polymer Electrolyte Cells10.1016/S0378-7753(03)00124-1 ↗
99. Solid Polymer Electrolyte Cells Using SnSb/Li2.6Co0.4N Composite Anodes10.1016/S0378-7753(01)00607-3 ↗
100. Highly Reversible Capacity Nanocomposite Anode for Secondary Lithium-Ion Batteries10.1016/j.elecom.2012.02.036 ↗