journal article·2022-10-14Open access

One-Pot Spray Engineering to Design Na0.44MnO2 Cathode Electrodes for High-Rate and Cycle-Stable Na-Ion Batteries

Bon-Ryul Koo, Young-Geun Lee, Sang Ho Lee, Geon-Hyoung An, Chun Huang

Batteries· Volume 8· Issue 10

Abstract

To improve the practical performance of Na-ion batteries, electrode structure engineering provides a new route to improve the electrochemical efficiency of the cathode active material. In this study, we suggest a new route of one-pot spray engineering to design Na0.44MnO2 cathodes to realize high-rate and cycle-stable Na-ion battery performance. This technique adjusts the electrode structure from a dense to an open sponge-like morphology during layer-by-layer deposition of the materials. The sponge-like cathode results in improved ion insertion and transport kinetics, thus accelerating the rate capability with increased capacity and high-rate cycling capability (100.1 mAh/g and 90.2% cycling retention after 100 cycles at 5 C). These results highlight the potential for design engineering of cathode structures to achieve high-rate and cycle-stable performance for Na-ion batteries.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH, UK

Department of Energy Engineering, Future Convergence Technology Research Institute, Gyeongsang National University, 33 Dongjin-ro, Jinju 52828, Gyeongnam, Korea

Department of Chemical Engineering, Pukyong National University, Busan 48513, Korea

Department of Energy System Engineering, Gyeongsang National University, 33 Dongjin-ro, Jinju 52828, Gyeongnam, Korea

Department of Materials, Imperial College London, London SW7 2AZ, UK

The Faraday Institution, Quad One, Becquerel Ave., Harwell Campus, Didcot OX11 0RA, UK

Research Complex at Harwell, Rutherford Appleton Laboratory, Didcot OX11 0FA, UK

Funding

Engineering and Physical Sciences Research Council (EPSRC) UKRI Innovation Fellowship · Faraday Industry Fellowship · Faraday Institution Training Grant · Imperial College London UKRI Impact Acceleration Account

References (63)

Show source-provided references
1. A solid-state battery cathode with a polymer composite electrolyte and low tortuosity microstructure by directional freezing and polymerization10.1002/aenm.202002387 ↗
2. Lithium metal extraction from seawater10.1016/j.joule.2018.07.006 ↗
3. The cathode choice for commercialization of sodium-ion batteries: Layered transition metal oxides versus prussian blue analogs10.1002/adfm.201909530 ↗
4. Sodium-ion batteries: Present and future10.1039/C6CS00776G ↗
5. Synthesis and physical properties of NaxTO2 (T = Mn, Co) nanostructures for cathode materials in Na–ion batteries10.1016/j.materresbull.2018.04.022 ↗
6. Recent advances and prospects of cathode materials for sodium-ion batteries10.1002/adma.201501527 ↗
7. Thermal-runaway experiments on consumer Li-ion batteries with metal-oxide and olivin-type cathodes
8. Lithium-pretreated hard carbon as high-performance sodium-ion battery anodes10.1002/aenm.201801441 ↗
9. Dual-phase MoS2 as a high-performance sodium-ion battery anode10.1039/C9TA11913B ↗
10. Biomimetic Sn4P3 anchored on carbon nanotubes as an anode for high-performance sodium-ion batteries10.1021/acsnano.0c03432 ↗
11. Phosphate framework electrode materials for sodium ion batteries10.1002/advs.201600392 ↗
12. Structural stability and ionic transport property of NaMPO4 (M = V, Cr, Mn, Fe, Co, Ni) as cathode material for Na-ion batteries10.1016/j.jpowsour.2019.227016 ↗
13. Structure and dynamics of fluorophosphate Na-ion battery cathodes10.1021/acs.chemmater.6b01989 ↗
14. Sodium vanadium fluorophosphates (NVOPF) array cathode designed for high-rate full sodium ion storage device10.1002/aenm.201800058 ↗
15. Prussian blue analogs for rechargeable batteries10.1016/j.isci.2018.04.008 ↗
16. Low-operating temperature, high-rate and durable solid-state sodium-ion battery based on polymer electrolyte and prussian blue cathode10.1002/aenm.201903351 ↗
17. Enhanced and stabilized charge transport boosting by Fe-doping effect of V2O5 nanorod for rechargeable Zn-ion battery10.1016/j.jiec.2021.04.041 ↗
18. High voltage structural evolution and enhanced Na-ion diffusion in P2-Na2/3Ni1/3−xMgxMn2/3O2 (0 ≤ x ≤ 0.2) cathodes from diffraction, electrochemical and ab initio studies10.1039/C7EE02995K ↗
19. Lithium and sodium battery cathode materials: Computational insights into voltage, diffusion and nanostructural properties10.1039/C3CS60199D ↗
20. Effects of the starting materials of Na0.44MnO2 cathode materials on their electrochemical properties for Na-ion batteries10.1016/j.electacta.2016.11.048 ↗
21. Durable high-rate capability Na0.44MnO2 cathode material for sodium-ion batteries10.1016/j.nanoen.2016.07.021 ↗
22. Stabilizing Na0.7MnO2 cathode for Na-ion battery via a single-step surface coating and doping process10.1016/j.jpowsour.2018.04.077 ↗
23. Suppressing the Unfavorable Surface Layer Growth on Na0.44MnO2 Cathode by a NaTi2(PO4)3 Coating To Improve Cycling Stability and Ultrahigh Rate Capability10.1021/acsaem.9b01471 ↗
24. Research progress of tunnel-structural Na0.44MnO2 cathode for sodium-ion batteries: A mini review10.1016/j.elecom.2020.106897 ↗
25. Na4Mn9O18 as a positive electrode material for an aqueous electrolyte sodium-ion energy storage device10.1016/j.elecom.2010.01.020 ↗
26. Electrochemical and structural characterization of titanium-substituted manganese oxides based on Na0.44MnO210.1016/j.jpowsour.2004.03.073 ↗
27. Structural design for anodes of lithium-ion batteries: Emerging horizons from materials to electrodes10.1039/C5MH00136F ↗
28. Multi-characterization of LiCoO2 cathode films using advanced AFM-based techniques with high resolution10.1038/s41598-017-11623-0 ↗
29. Mesoporous Co3O4 nanowire arrays for lithium ion batteries with high capacity and rate capability10.1021/nl0725906 ↗
30. Orderly packed anodes for high-power lithium-ion batteries with super-long cycle life: Rational design of MnCO3/Large-area graphene composites10.1002/adma.201404611 ↗
31. Spray printing and optimization of anodes and cathodes for high performance Li-Ion batteries10.1016/j.electacta.2018.09.132 ↗
32. Low-tortuosity cathodes by ice and graded lithium ion battery templating10.1039/C9TA07269A ↗
33. Multi-layered composite electrodes of high power Li4Ti5O12 and high capacity SnO2 for smart lithium ion storage10.1016/j.ensm.2021.02.010 ↗
34. Hybrid nanocomposites of tunneled-mesoporous sulfur-doped carbon nanofibers embedded with zinc sulfide nanoparticles for ultrafast lithium storage capability10.1016/j.jallcom.2020.157206 ↗
35. High energy lithium ion capacitors using hybrid cathodes comprising electrical double layer and intercalation host multi-layers10.1016/j.ensm.2020.08.022 ↗
36. Layer-by-layer printing of multi-layered heterostructures using Li4Ti5O12 and Si for high power Li-ion storage10.1016/j.nanoen.2019.04.044 ↗
37. Coral-like cathodes by ice directional porosity lithium ion battery templating10.1039/C8TA05049J ↗
38. A two layer electrode structure for improved Li Ion diffusion and volumetric capacity in Li Ion batteries10.1016/j.nanoen.2016.11.043 ↗
39. Heterogeneous damage in Li-ion batteries: Experimental analysis and theoretical modeling10.1016/j.jmps.2019.05.003 ↗
40. Controlling the coating microstructure on axial suspension plasma spray process10.1016/j.surfcoat.2018.09.055 ↗
41. Promoting transport kinetics in Li-ion battery with aligned porous electrode architectures10.1021/acs.nanolett.9b03824 ↗
42. Fluorine anion doped Na0.44MnO2 with layer-tunnel hybrid structure as advanced cathode for sodium ion batteries10.1016/j.jpowsour.2019.04.038 ↗
43. Structural insight into the abnormal capacity of Co-substitution tunnel-type Na0.44MnO2 cathode for sodium ion batteries10.1021/acsami.0c13278 ↗
44. Particle aggregation in large counter-current spray drying towers: Nozzle configuration, vortex momentum and temperature10.1016/j.proeng.2015.01.162 ↗
45. Hierarchical porous silicon structures with extraordinary mechanical strength as high performance lithium-ion battery anodes10.1038/s41467-020-15217-9 ↗
46. Fast-switching electrochromic properties of mesoporous WO3 films with oxygen vacancy defects10.1039/C7NR06796H ↗
47. Binder-free Si nanoparticle electrode with 3D porous structure prepared by electrophoretic deposition for lithium-ion batteries10.1021/acsami.5b00421 ↗
48. Hierarchical hollow prussian blue rods synthesized via self-sacrifice template as cathode for high performance sodium ion battery10.1002/smtd.201800259 ↗
49. Parametric study of hydrothermal soft chemical synthesis and application of Na0.44MnO2 nanorods for Li-ion battery cathode materials: Synthesis conditions and electrochemical performance10.1016/j.jallcom.2015.10.243 ↗
50. Elucidating anionic oxygen activity in lithium-rich layered oxides10.1038/s41467-018-07595-y ↗
51. Shen, Q., Zhao, X., Liu, Y., Li, Y., Zhang, J., Zhang, N., Yang, C., and Chen, J. (2020). Dual-Strategy of Cation-Doping and Nanoengineering Enables Fast and Stable Sodium-Ion Storage in a Novel Fe/Mn-Based Layered Oxide Cathode. Adv. Sci., 2002199.10.1002/advs.202002199 ↗
52. A stable layered oxide cathode material for high-performance sodium-ion battery10.1002/aenm.201803978 ↗
53. Boosting Ultrafast Lithium Storage Capability of Hierarchical Core/Shell Constructed Carbon Nanofiber/3D Interconnected Hybrid Network with Nanocarbon and FTO Nanoparticle Heterostructures10.1002/adfm.202001863 ↗
54. Long cycle life and high rate capability of three dimensional CoSe2 grainattached carbon nanofibers for flexible sodium-ion batteries10.1016/j.nanoen.2019.01.062 ↗
55. Advanced Energy Storage Devices: Basic Principles, Analytical Methods, and Rational Materials Design10.1002/advs.201700322 ↗
56. An inactive metal supported oxide cathode material with high rate capability for sodium ion batteries10.1016/j.ensm.2019.05.009 ↗
57. Structural Optimization of 3D Porous Electrodes for High-Rate Performance Lithium Ion Batteries10.1021/nn505490u ↗
58. Facile Synthesis of Nb2O5@Carbon Core-Shell Nanocrystals with Controlled Crystalline Structure for High-Power Anodes in Hybrid Supercapacitors10.1021/acsnano.5b02601 ↗
59. Capacitance controlled, hierarchical porous 3D ultra-thin carbon networks reinforced prussian blue for high performance Na-ion battery cathode10.1016/j.nanoen.2019.01.048 ↗
60. Observation of Pseudocapacitive Effect and Fast Ion Diffusion in Bimetallic Sulfides as an Advanced Sodium-Ion Battery Anode10.1002/aenm.201703155 ↗
61. Boosting fast and durable sodium-ion storage by tailoring well-shaped Na0.44MnO2 nanowires cathode10.1016/j.electacta.2019.04.140 ↗
62. Ti-substituted tunnel-type Na0.44MnO2 oxide as a negative electrode for aqueous sodium-ion batteries10.1038/ncomms7401 ↗
63. A Dual-Carbon Battery Based on Potassium-Ion Electrolyte10.1002/aenm.201700920 ↗