Distortion and Destabilization of Mg Hydride Facing High Entropy Alloy Matrix

The thermal stability of an equilibrium phase may be tuned due to lattice strain and distortion induced by nanosizing. We apply these effects to destabilize magnesium hydride, a promising hydrogen storage material owing to its high gravimetric hydrogen density but with a too high operating temperature/low supply pressure of hydrogen for most practical applications. The destabilization is attempted with MgH 2 in contact with high entropy alloy (HEA), in which multiple metal atoms lead to lattice strain and distortion. Here, two HEAs, CrMnFeCoNi with a face centered cubic (fcc) structure and TiVZrNbHf with a body centered cubic (bcc) structure, were prepared. Subsequently, they were cosputtered with Mg to synthesize Mg–HEA thin films, respectively. Although, in the Mg–CrMnFeCoNi thin films, miscible metals with Mg as Co and Ni may hamper the formation of independent Mg domains, a small proportion of Mg atoms form destabilized MgH 2 . In contrast, Mg and TiVZrNbHf domains are chemically segregated at the nanoscale in the Mg–TiVZrNbHf thin films. The formation of nanometer-sized Mg domains is promoted by atomic rearrangement following the structural change of TiVZrNbHf from a bcc to an fcc structure upon hydrogenation, resulting in distorted and destabilized MgH 2 . Our strategy to use HEAs and the structural change upon hydrogenation for the formation of destabilized MgH 2 is effective and opens up the possibility for the development of advanced and low-cost hydrogen storage and supply systems.