Optimum Conditions for Adsorptive Storage
Source abstract
Abstract
The storage of gases in porous adsorbents, such as activated carbon and carbon nanotubes, is examined here thermodynamically from a systems viewpoint, considering the entire adsorption-desorption cycle. The results provide concrete objective criteria to guide the search for the "Holy Grail" adsorbent, for which the adsorptive delivery is maximized. It is shown that, for ambient temperature storage of hydrogen and delivery between 30 and 1.5 bar pressure, for the optimum adsorbent the adsorption enthalpy change is 15.1 kJ/mol. For carbons, for which the average enthalpy change is typically 5.8 kJ/mol, an optimum operating temperature of about 115 K is predicted. For methane, an optimum enthalpy change of 18.8 kJ/mol is found, with the optimum temperature for carbons being 254 K. It is also demonstrated that for maximum delivery of the gas the optimum adsorbent must be homogeneous, and that introduction of heterogeneity, such as by ball milling, irradiation, and other means, can only provide small increases in physisorption-related delivery for hydrogen. For methane, heterogeneity is always detrimental, at any value of average adsorption enthalpy change. These results are confirmed with the help of experimental data from the literature, as well as extensive Monte Carlo simulations conducted here using slit pore models of activated carbons as well as atomistic models of carbon nanotubes. The simulations also demonstrate that carbon nanotubes offer little or no advantage over activated carbons in terms of enhanced delivery, when used as storage media for either hydrogen or methane.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Zeolite Catalysis and Synthesis · Hydrogen Storage and Materials · Phase Equilibria and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Chemical Engineering, The University of Queensland, Brisbane, QLD 4072 Australia
Department of Chemical and Biomolecular Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104
References (55)
Show source-provided references
1. Hu Y. H. · Ind. Eng. Chem. Res. · 2004 · 43 · 417410.1021/ie0498394 ↗
2. Lee H. · Nature · 2005 · 434 · 74310.1038/nature03457 ↗
3. Schlapbach L. · Nature · 2005 · 414 · 35310.1038/35104634 ↗
4. Orimo S. · J. Alloys Compd. · 2003 · 356 · 71610.1016/S0925-8388(03)00175-0 ↗
5. Matranga K. R. · Chem. Eng. Sci. · 1992 · 47 · 156910.1016/0009-2509(92)85005-V ↗
6. Chahine R. · Int. J. Hydrogen Energy · 1994 · 19 · 16110.1016/0360-3199(94)90121-X ↗
7. Chen P. · Science · 1999 · 285 · 9110.1126/science.285.5424.91 ↗
8. Nijkamp M. G. · Appl. Phys. A · 2001 · 72 · 61910.1007/s003390100847 ↗
9. Bénard P. · Langmuir · 2002 · 17 · 195010.1021/la001381x ↗
10. de la Casa-Lillo M. A. · J. Phys. Chem. B · 2002 · 106 · 1093010.1021/jp014543m ↗
11. Rosi N. L. · Science · 2003 · 300 · 112710.1126/science.1083440 ↗
12. Nechaev Y. S. · Russ. Chem. Rev. · 2004 · 73 · 121110.1070/RC2004v073n12ABEH000833 ↗
13. Düren T. · AIChE J. · 2004 · 20 · 2683
14. van den Berg A. W. C. · Microporous Mesoporous Mater. · 2005 · 78 · 6310.1016/j.micromeso.2004.09.017 ↗
15. Lazano-Castello D. · Fuel · 2002 · 81 · 177710.1016/S0016-2361(02)00124-2 ↗
16. Chambers A. · J. Phys. Chem. B · 1998 · 102 · 425310.1021/jp980114l ↗
17. Cracknell R. F. · Phys. Chem. Chem. Phys. · 2001 · 3 · 209110.1039/b100144m ↗
18. Yang R. T. · Carbon · 2000 · 38 · 62310.1016/S0008-6223(99)00273-0 ↗
19. Takagi H. · Mater. Sci. Eng. · 2004 · 108 · 14310.1016/j.mseb.2003.10.095 ↗
20. Cracknell R. F. · J. Mol. Liq. · 1992 · 54 · 26110.1016/0167-7322(92)80033-E ↗
21. Eddaoudi M. · Science · 2002 · 295 · 46910.1126/science.1067208 ↗
22. Pan L. · J. Am. Chem. Soc. · 2004 · 126 · 130810.1021/ja0392871 ↗
23. Sagara T. · J. Chem. Phys. · 2004 · 121 · 1254310.1063/1.1809608 ↗
24. Rowsell J. L. C. · J. Am. Chem. Soc. · 2004 · 126 · 566610.1021/ja049408c ↗
25. Garberoglio G. · J. Phys. Chem. B · 2005 · 109 · 1309410.1021/jp050948l ↗
26. Heine T. · Phys. Chem. Chem. Phys. · 2004 · 6 · 98010.1039/b316209e ↗
27. Areán C. O. · Chem. Phys. Lett. · 2003 · 370 · 63110.1016/S0009-2614(03)00172-6 ↗
28. Cheng H. S. · J. Phys. Chem. B · 2005 · 109 · 378010.1021/jp045358m ↗
29. Li J. · J. Chem. Phys. · 2003 · 119 · 237610.1063/1.1582831 ↗
30. Orimo S. · Appl. Phys. Lett. · 1999 · 75 · 309310.1063/1.125241 ↗
31. Orimo S. · Met. Mater. · 2000 · 6 · 60110.1007/BF03028106 ↗
32. Orimo S. · J. Appl. Phys. · 2001 · 90 · 154510.1063/1.1385362 ↗
33. Fukunaga K. · J. Alloys Compd. · 2001 · 327 · 22410.1016/S0925-8388(01)01420-7 ↗
34. Hirscher M. · J. Alloys Compd. · 2002 · 330 · 65410.1016/S0925-8388(01)01643-7 ↗
35. Atsumi H. · J. Alloys Compd. · 2003 · 356 · 70510.1016/S0925-8388(03)00290-1 ↗
36. Imamura H. · J. Alloys Compd. · 2002 · 330 · 57910.1016/S0925-8388(01)01506-7 ↗
37. Gregg S. G. · 1982
38. Uberuaga B. P. · Phys. Rev. Lett. · 2003 · 91 · 10590110.1103/PhysRevLett.91.105901 ↗
39. Bhatia S. K. · Langmuir · 2002 · 18 · 684510.1021/la0201927 ↗
40. Nguyen T. X. · J. Chem. Phys. · 2002 · 117 · 1082710.1063/1.1522402 ↗
41. Bhatia S. K. · Langmuir · 2004 · 20 · 961210.1021/la048571i ↗
42. Buch V. J. · J. Chem. Phys. · 1994 · 100 · 761010.1063/1.466854 ↗
43. Steele W. A. · 1974
44. Honig J. M. · J. Phys. Chem. · 1952 · 56 · 14010.1021/j150493a027 ↗
45. Metropolis N. · J. Chem. Phys. · 1953 · 21 · 108710.1063/1.1699114 ↗
46. Adams D. · J. Mol. Phys. · 1974 · 28 · 510.1080/00268977400102551 ↗
47. Nicholson D. · 1982
48. Bhatia S. K. · J. Chem. Phys. · 2003 · 119 · 171910.1063/1.1580797 ↗
49. Avgul N. N. · J. Colloid Interface Sci. · 1973 · 42 · 48610.1016/0021-9797(73)90034-9 ↗
50. Thanh T. X. · J. Phys. Chem. B · 2004 · 108 · 1403210.1021/jp049048f ↗
51. Tanaka H. · J. Phys. Chem. B · 2004 · 108 · 1745710.1021/jp048603a ↗
52. Feynman R. P. · 1965
53. Atkins P. W. · 1994
54. Myers A. L. · Colloids Surf. · 2001 · 187 · 7310.1016/S0927-7757(01)00624-0 ↗
55. Sellers H. · Surf. Sci. · 1999 · 426 · 14710.1016/S0039-6028(99)00189-2 ↗