"Investigation of the influence of low-frequency harmonic oscillations on deposited metal "
Source abstract
Abstract
An analysis of current research results shows that specific changes in the deposited metal microstructure are already observed at the periodical impact of 2.5 Hz frequency on it. However, most current research concerns oscillations from the frequency series, which is much higher than 10 Hz, while the oscillation amplitude values are in the range from tens of microns to 2 mm. This circumstance led to the performance of studies on the influence of mechanical harmonic oscillations of the weld pool with a frequency range from 2.5 to 4.5 Hz at the amplitude of 3-7 mm on the weld pool and the HAZ metal. The specimens for investigations were obtained by the GMAW surfacing process in the condition of weld pool oscillations. Treatment of data was conducted by the least squares regression analysis method to plot polynomials. K e y w o r d s : weld pool oscillations, deposited metal hardness
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Applications · Surface Treatment and Coatings · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.