article·2022-09-10Open access

Experimental evaluation and FE simulation of phase transformations and tensile stresses in hot forging and controlled cooling

Çağlar Hocalar, Nurşen Saklakoğlu, Selcuk Demirok

Abstract

This paper encompasses the development of a microstructure-based numerical model (FEM) of the conveyor cooling process after the hot forging of industrial steel with accurate predictions of the volume fraction of phases as yield and tensile strengths. An experimental procedure for validating the FEM was conducted using optical and scanning electron microscopy and tensile tests. Results showed very good agreement between the phase predictions of the 3D FEM model and those obtained from direct measurement of forged parts, with an average error of about 3.6 and 6.9 % for ferrite and pearlite phases, respectively. Tensile test results were evaluated at a 90 % reliability level, and very good agreements were obtained with an error of about 3 and 5 % for the yield and tensile strengths. The methodology could predict the phase transformations, and the mechanical properties during cooling after the hot forging of the steel were investigated.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.