article·2001-01-01

Mechanical Properties and Microstructure of Steel Pipes for Gas Bottles

Mirko Gojić, Ladislav Kosec, Stjepan Kožuh

Abstract

In this paper mechanical and microstructural results of laboratory heat treatment (quenching and tempering) of seven various heats made of low-alloyed manganese steels are shown. The effect of vanadium and nitrogen contents on the yield/tensile strength ratio of pipes in quenched and tempered state was analysed. The linear relationship between the total amount of vanadium and nitrogen contents and the yield/tensile strength ratio was found. The obtained results are suitable for various heats of following chemical composition. 0.32-0.35 wt.% C, 1-13-1.37 wt.% Mn, 0.15-0.22 wt.% V, and 0.0070-0.00127 wt. % N. Quenching the pipes in oil from 850oC, tempering them at 650oc and cooling them in air, the required mechanical properties are obtained. In order to obtain the yield/tensile strength ratio below 0.95, the total amount of vanadium and nitrogen should be lower than 2200 ppm.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Material Properties and Failure Mechanisms · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.