article·2010-01-01Open access

An improved, stress-dependent, energy-barrier model for the creep of 9Cr-1Mo-0.2V steel under disc-bend loading

Aleš Nagode, B. Ule, Ladislav Kosec, Monika Jenko

Abstract

In this paper we describe the creep behaviour of 9Cr-1Mo-0.2V steel under disc-bend loading, also known as the small-punch method. An improved power-law, stress-dependent, energy-barrier model was used to describe the creep behaviour of 9Cr-1Mo-0.2V steel because the characteristics of this steel cannot be accurately described using a simple, Arrhenius-type power law. A good correlation between the calculated values from the improved model and the experimental data was obtained for discs of different thickness, i.e., 0.50 mm, 0.47 mm and 0.44 mm. We found that the optimum disc thickness for our small-punch device was 0.50 mm. The stress-dependent, apparent activation energy of creep for a disc thickness of 0.50 mm decreased from 543 kJ mol -1 to 535 kJ mol -1 as the load increased from 350 N to 550 N, with the load exponent equal to 4.5. These values are very close to the results from conventional, uniaxial creep tests. K e y w o r d s : small-punch, 9Cr-1Mo-0.2V steel,
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fire effects on concrete materials · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.