article·2017-01-01Open access

Microstructure evolution and mechanical properties of the Mg-7Zn-(xY-0.6Zr (x = 6, 9, 12 wt.%) alloys

Z. Q. ZHANG, Shiyang Yin, X. LIU, Liangjin Bao, Wentao Hu, Q. C. LE, J. Z. CUI

Abstract

Mg-7Zn-xY-0.6Zr (x = 6, 9, 12 wt.%) alloys have been designed to investigate the effects of Y content on the microstructure and mechanical properties. The results show that Y content plays a key role in the phase composition and mechanical properties of the investigated Mg-7Zn-xY-0.6Zr alloys. With the Y content increasing from 6 to 12 %, the phase composition transformed from -Mg + W-phase (Mg3Y2Zn3) to -Mg + X-phase (Mg12YZn). The amount of X-phase increases rapidly, and W-phase decreases accordingly. Furthermore, the W-phase distributes alternatively with the X-phase, due to the specific local Y/Zn mole ratio at the final solidifying stage. After extrusion, the phase composition and corresponding volume fraction have great influence on mechanical properties. The X-phase is in favour of high strength and the W-phase makes for good plasticity. The as-extruded Mg-7Zn-12Y-0.6Zr alloy establishes the highest strength with an ultimate tensile and yield tensile strength of 416 MPa and 302 MPa, respectively. K e y w o r d s : Mg-Zn-Y-Zr, extrusion, casting and solidification, microstructures, mechanical properties
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.