article·2021-01-01Open access

Diffusion enhancement of low-temperature pack aluminizing on austenitic stainless steel AISI 304 by deep rolling process

W. YUTANORM, Patiphan Juijerm

Abstract

The deep rolling process is a mechanical surface treatment which plastically deforms only the surface and near-surface regions.The deep rolled AISI 304 austenitic stainless steel has been investigated to illustrate the near-surface plastic deformation effect on the aluminium diffusion rate in the low-temperature pack aluminizing process.Near-surface properties such as residual stresses and full width at half maximum (FWHM) values were measured using the X-ray diffractometer (XRD).The deep rolled, and non-deep rolled specimens were aluminized using powder pack method at the relatively low temperature of 550 • C for about 2-8 h.A scanning electron microscope (SEM) with energy dispersive X-ray spectrometer (EDS) and XRD were used to characterize the surface layers.It was found that the deep rolled condition shows the higher diffusion coefficient as compared to the non-deep rolled condition.Finally, it can be mentioned that the deep rolling process can enhance the diffusion rate of the pack aluminizing treatment at the temperature of 550 • C. K e y w o r d s : stainless steel
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.