article·2016-01-01Open access

Creep of three-phase alloy Fe-30%Al-5.2%Zr

F. DOBES, P. Kratochvı́l, P. KEJZLAR

Abstract

Compressive creep of alloy based on Fe-30at.%Al with addition of 5.2 at.% zirconium was studied at temperatures from 650 to 900 C. The alloy was tested in two different states: (i) cast and (ii) annealed at 1000 C for 50 h. The microstructure of cast alloy consisted of matrix (/B2/D03) and fine lamellar eutectic composed of 1 and (/B2/D03). The eutectic decomposed during annealing at 1000 C into 1 and 1 phases. Stress exponents and activation energies were estimated. The values of the stress exponent n can be explained by dislocation motion controlled by climb. The values of the activation energy in both cast and annealed alloy are greater than the activation enthalpy of diffusion. Creep exposure at 900 C for about 50 h is probably sufficient for attainment the three-phase structure because the same microstructure was observed after creep at 900 C, in both as-cast and annealed states. In contrast, creep expositions at 650 and 700 C did not influence the appearance of microstructure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.