Joining of Mo and MoSi2 and their interaction with nickel
Source abstract
Abstract
Joining of Mo and MoSi2 with Mo and/or MoSi2 by brazing with nickel was studied. Molybdenum disilicide was prepared by the reaction of liquid silicon with the Mo substrate at the temperature of 1530 C and 3 min. Wetting of both Mo substrate and MoSi2 was measured by sessile drop method; wetting angles were very low (close to zero). Products of interaction of Mo and/or MoSi2 with Ni were studied by electron microscopy with energy-dispersive spectroscopy (EDS) and X-ray diffraction methods (XRD). Shear strength of the joints was measured by push-off method. The Mo-Ni-Mo system produced a joint with no cracking or porosity with the shear strength 134.5 MPa. MoSi2-Ni-MoSi2 joint due to different thermal expansion of materials being joined exhibited porous interface and catastrophic cracking through Mo5Si3 with the shear strength 37.0 MPa. K e y w o r d s : molybdenum
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.