article·2021-01-01Open access

The effects of process parameters on the surface form of laser engraved H13 tool steel

Şefika Kasman, İ.E. Saklakoğlu

Abstract

The milling of hard materials with a complex shape using conventional methods causes many tool based problems. However, a laser assisted milling process eliminates the tool-based problem because of the small, high intensity beam used. Laser engraving, which is one of milling methods, is an effective process for the machining of difficult to machine geometries and materials like hot work tool steels. This study focuses on recast layer formation and subsurface hardness as a function of distance. Power, scan speed and frequency were employed for the investigation. The highest hardness was detected at 201 HV, which measured at 800 mm s(-1) for scan speed and 40 kHz for frequency. XRD analysis showed that two different phases, Fe and Fe2.96Si0.05O4, existed on the machined surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser and Thermal Forming Techniques · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.