article·2013-01-01Open access

Influence of technological parameters on evolution of phases in Al-CMA composites prepared by powder metallurgy

Ivona Černičková, L. ROŠČÁK, Fahad Ali, Martin Kusý, S. Scudino, Roman Čička, Marián Drienovský, Pavol Priputen, Jozef Janovec

Abstract

The CMA-powder and the Al-CMA composite (CMA = Al73Mn21Fe6) have been studied with the intention to characterize the influence of selected technological procedures (milling for 80 h, extrusion at 400 C under 500 MPa, compaction at 550 C for 0.5 h, and annealing at 550 C for respective 0.25 and 0.5 h) on the phase evolution inside CMA-areas and at Al/CMA interfaces. In the investigation X-ray diffraction and scanning electron microscopy including energy dispersive X-ray spectroscopy were used. It was shown that CMA-powder consisting of T(HT) + 2 became totally amorphous after 80 h of milling. During extrusion, compaction, and annealing of the Al-CMA composite, the originally amorphous CMA particles were found to transform into crystalline phases at the assistance of aluminium diffusion towards the CMA-area. At the Al/CMA interfaces on the CMA side, IMC-areas (IMC = intermetallic compound) were formed consisting of Al6(Mn, Fe). T(LT) + Al4(Mn, Fe) + Al6(Mn, Fe) phases were identified in the CMA-areas after the annealing of the Al-CMA composite for 0.5 h at 550 C. K e y w o r d s : metal-
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Powder Metallurgy Techniques and Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.