Microstructural aspects of laser surface treatment of commercially pure titanium
Source abstract
Abstract
Commercially pure (CP) titanium was subjected to cw-CO2 laser surface treatment. The treatment was carried out using a side-by-side dual laser beam. The initial and surface treated materials were subjected to structural and microstructural examination. It was found that the microstructure in the laser treated zone changed from an -phase present in the non-remelted material to martensite as a consequence of the very high rates of cooling. An increase in the diffraction reflections originating from the (101) titanium plane was observed in the remelted sample. Despite the fact the laser treatment was conducted in a protective gas shield, limited oxidation occurring due to the high reactivity of titanium was observed. Analysis of the remelting parameters in connection with the macroscopic evaluation and microstructural changes in the surface layer allowed the relationships facilitating the shaping of the melting zone geometry, as well as the scope of microstructural changes to be determined.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Coatings · Material Properties and Applications · Engineering Technology and Methodologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.