article·2010-01-01Open access

Abrasive wear of WC-NiMoCrFeCo thermally sprayed coatings in dependence on different types of abrasive sands

Michaela Kašparová, František Zahálka, Šárka Houdková, Pavel Ctibor

Abstract

The abrasive wear is a very extended type of wear, which in 80 %-90 % causes all possible damages of machine elements operation parts. WC-NiMoCrFeCo coating was investigated as an advantageous material for wear protection and its abrasion wear resistance was tested. The tribological tests were performed in "low-stress conditions" using Dry Sand Rubber/Wheel Test in accordance with the ASTM G-65 Standard. Alumina and silica abrasive sands were chosen in three different size distributions: Al2O3 in grain size 75-90 m, 212-250 m, 600-700 m and SiO2 in grain size 60-90 m, 200-300 m, 600-700 m. The wear tracks of WC--Hastelloy coating were examined using scanning electron microscope. WC-NiMoCrFeCo was found as a good alternative to the commonly used carbide coating. To evaluate an abrasive ability and efficiency of all abrasive mediums, the wear test of soft carbon steel and of WC--Hastelloy coating was performed by periodical using of abrasive particles. K e y w o r d s : WC-Hastelloy,
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.