article·2020-01-01Open access

Effect of post-processing heat treatment on microstructure evolution and mechanical properties of in-situ Al/(Al3Ni-TiC) hybrid composite fabricated by friction stir processing using mechanically activated powders

Hamed Fotoohi, Behnam Lotfi, Zohreh Sadeghian, Jai Won Byeon

Abstract

Al matrix composites reinforced with in-situ synthesized TiC/Al3Ni particles were fabricated by friction stir processing (FSP) using mechanically activated powders. The effects of post-processing heat treatment on the microstructure and mechanical properties were investigated. Ni-Ti-C powder mixtures were prepared by mechanical alloying (MA) and distributed in AA1050 alloy using FSP. The microstructure of composite layers was studied by optical and field emission scanning electron microscopy (FESEM), and structural evolutions during FSP and heat treatment were investigated by X-ray diffractometry (XRD). XRD analysis showed partial reaction between MAed powders and the matrix after 2 FSP passes and the formation of Al3Ni and TiC compounds. Unreacted powders remained after 6 FSP passes, transformed to Ni3Al and TiC after heat treatment at 550 C. Mechanical properties of composite layers were investigated by tensile and microhardness tests. Heat-treated surface composite layer exhibited an increased tensile strength of 158 MPa with more uniform microhardness in comparison with the as-FSPed sample.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.