Investigation of the heat treatment effect in milling of K390 powder metallurgical steel
Source abstract
Abstract
In this study, surface roughness, tool wear and cutting force have been investigated in milling of Böhler K390 cold work tool steel with coated carbide inserts. Test specimens were tempered at different three temperatures after quenching. Milling tests were performed at four different cutting speeds and feed rates. Surface roughness Ra and cutting forces were measured for further evaluation. Besides, images of cutting inserts were taken from electron microscope (SEM) for determining the wear types and mechanism. Analysis of variance (ANOVA) was used to determine the most influencing cutting parameters on the milling performance. According to the experimental results, they have been low cutting force, value of Ra (0.031 µm), and minimum tool wear in a specimen tempered at high temperature. Due to intermitted cutting, pressure and high temperature, there are more chipping and attrition on cutting insert. Surface qualities of milling surfaces were obtained by grinding operations. According to the analysis of variance feed rate levels, the most effective parameters are Ra and Fm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Engineering Technology and Methodologies · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.