Microstructure, microhardness, tensile, electrical, and thermal properties of the Al-Mn-xSi ternary alloys
Source abstract
Abstract
The effect of Si content (0.5, 1.5, and 5 wt.%) and growth velocity on the microstructure, microhardness, ultimate tensile strength, electrical resistivity, enthalpy, and specific heat properties of the directionally solidified Al-Mn eutectic alloy have been investigated. Al-1.94Mn-xSi (x = 0.5, 1.5, 5 wt.%) samples were prepared from pure metals (99.99 % purity) under the vacuum. These alloys were directionally solidified under constant temperature gradient G (4.9 K mm -1 ) and different growth velocities V (from 8.3 to 978 m s -1 ) in a Bridgman-type growth apparatus. Measurements of primary dendrite arm spacing (), microhardness (HV), ultimate tensile strength (UTS) and electrical resistivity () of the samples were carried out and then expressed as functions of growth velocity and Si content (Co). Additionally, the enthalpy of fusion (H) and specific heat capacity (Cp) for the same alloys were determined by a differential scanning calorimeter (DSC) from the heating curves. It has been found that the values of HV, UTS, and increase with increasing values of V and Co. On the contrary, the values of decrease with increasing V . The increasing Si content in Al-Mn leads to a decrease of H and Cp.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Quasicrystal Structures and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.