article·2013-01-25Open access

Effect of casting parameters on the microstructure and mechanical properties of squeeze cast A380 aluminum die cast alloy

Hiiseyin Murãt Lus

Abstract

A380 Al-Si-Cu die casting alloy is the most common of all die casting Al alloys and is used especially in the automotive industry due to the best combination of utility and cost. A high percentage of these components are produced by a high pressure die casting process; however, the quality and performance of these components need to be improved. Therefore, different approaches to component-making have been introduced such as semi-solid forming or squeeze casting over the last four decades. In the present study, direct squeeze casting of A380 alloy as a function of applied pressure was investigated. Applied pressures from 10 MPa to 50 MPa were considered and compared with gravity die cast samples. SDAS values ranging from 5.70 m to 10 m have been obtained by squeeze casting whereas 13.70 m was found in gravity die casting. Density measurements and mechanical tests show us that the porosity level and presence of micro-voids were greatly decreased with increasing pressure while ultimate tensile strength and elongation increased in squeeze cast parts. K e y w o r d s : squeeze casting,
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.