article·2016-01-01Open access

The influence of the heat treatment on mechanical and microstructure properties of Fe-Mn-C high-manganese steel

Yüksel Akınay, Fatih Hayat

Abstract

The influence of the heat treatment on mechanical properties and microstructures of the Fe-22Mn-0.6C high-manganese steel was investigated at different annealing temperatures. A high-Mn TWIP (Twinning Induced Plasticity) steel specimens (0.6C, 24Mn steel) were fabricated, and were annealed at 700, 900, and 1100 C for 150 min and then air-cooled. The carbide precipitates in the microstructure of specimens were annealed at 700 C. However, the microstructure of specimens annealed at 900 and 1100 C is austenite and some grains include annealing and mechanical twins. The results show that tensile strength of the material decreased, and the ductility of material was improved with increasing annealing temperature. Besides that, hardness value decreased between 700 and 1100 C, which shows a good agreement with the equilibrium dissolution temperature of M3C carbides.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.