article·2021-01-01Open access

Effect of severe plastic deformation on creep behaviour and microstructure changes of P92 at 923 K

Pétr Král, Jiří Dvořák, Václav Sklenička, Takahiro Masuda, Yongpeng Tang, Z. Horita, Lenka Kunčická, K. Kuchařová, Marie Kvapilová, Marie Svobodová

Abstract

The creep behaviour of P92 steel at 923 K, deformed by rotary swaging (RS) and highpressure torsion (HPT), was investigated. The RS-processed state contained extremely inhomogeneous microstructure containing large elongated and fine, more or less equiaxed grains. By contrast, the HPT-processed state consists of homogeneous fine-grained microstructure. It was found that both the microstructures coarsen not only with the increasing creep time but also with creep strain. The creep strain significantly accelerates the coarsening of the microstructure, especially in the HPT-processed state. The grain coarsening during creep leads to the change of the creep rate stress exponent n thus to the change of creep mechanism. The value of n depends on the ratio grain versus stationary subgrain size. P92 steel processed by RS and HPT exhibited faster min and higher ductility compared to coarse-grained (CG) state. However, RS-processed P92 steel can exhibit at high stresses similar creep behaviour as CG state. K e y w o r d s : creep-resistant 9% Cr
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.