article·2019-11-21Open access

Effect of Al content on microstructure of Ti-Al-Nb-C-Mo composites reinforced with carbide particles

A. Klimová, J. Lapin

Abstract

The effect of Al content on the microstructure of Ti-xAl-8Nb-3.6C-0.8Mo (at.%) composites reinforced with carbide particles, where x = 38, 42, 45, and 47 at.%, was studied. The composites prepared by vacuum induction melting in graphite crucibles followed by centrifugal casting into graphite moulds were studied in the as-cast and heat-treated state. The intermetallic matrices of the as-cast composites consisting of 2(Ti3Al)-, (TiAl)-, and /B2(Ti)-phases are reinforced with uniformly distributed carbide particles composed of (Ti,Nb)2AlC-phase and small amount of (Ti,Nb)C-phase preserved in the cores of some coarse irregular shaped carbides. The increasing Al content leads to a decrease in the volume fraction of /B2-phase and an increase in the volume fraction of the lamellar 2 + and single -phase regions in the as-cast composites. The increasing Al content increases shape factor and decreases the mean size of the primary carbide particles. In the heat-treated composites, the intermetallic matrices change from multiphase composed of lamellar 2 + grains with /B2-and -phase regions formed along the lamellar grain boundaries, through nearly lamellar to single -phase with increasing Al content. The (Ti,Nb)C regions in the core of some carbide particles transform to (Ti,Nb)2AlC-phase during the heat-treatment. The Vickers hardness and matrix microhardness decrease with the increasing Al content in both the as-cast and heat-treated composites.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.