article·2017-01-01Open access

The effect of friction stir welding parameters on microstructure and fatigue strength of CuZn37 brass alloys

Alpay Özer, A. SIK, Bekir Çevik, Melika Özer

Abstract

In this study, CuZn37 plates were joined by using friction stir welding. Welding was performed at a rotational speed of 750 rpm and a welding speed of 20 mm min -1 , and at a rotational speed of 1000 rpm and welding speeds of 20, 40, 60 mm min -1 . The welded samples were analyzed at the macro-microstructural level. Moreover, both hardness and fatigue tests were performed on samples. At the end of the macrostructural examination of the samples welded at the rotational speed of 1000 rpm and the welding speed of 20 mm min -1 , the formation of tunnel defects was observed. While the best fatigue life results at low strain rates were obtained in the samples joined at the rotational speed of 750 rpm and the welding speed of 20 mm min -1 , those at high strain rates were obtained in the samples joined at the rotational speed of 1000 rpm and the welding speed of 60 mm min -1 . K e y w o r d s : friction stir welding,
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Science · Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.