Effects of cryogenic treatment on residual stresses of AISI D2 tool steel
Source abstract
Abstract
Positive effects of cryogenic treatment on residual stresses of AISI D2 cold work tool steel were studied in this article. Samples were exposed to the cryogenic treatment at -145 C for short and long holding durations (4 and 24 h, respectively). Alteration in residual stress distribution was correlated with the microstructure, hardness and surface roughness examinations of the samples. Results showed that cryogenic treatment reduced the residual surface stresses in comparison to the conventional heat treatment. There was no significant difference in hardness values and retained austenite contents. However, more dense and homogeneous carbide precipitation was observed mainly for the cryo-treated sample for 24 h. Surface roughness was found better for cryo-treated samples. In general, holding duration of 24 h represented preferable conditions, and this case was achieved by using the improved microstructure. K e y w o r d s : AISI D2 steel, cryogenic treatment, residual stress, carbide precipitation, surface roughness
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.