Residual Stress Evolution Under Varying Process Parameters During L-DED of AISI 316L Stainless Steel Using Cantilever Beam Experiments and Finite Element Analysis
Source abstract
Abstract
Laser directed energy deposition (L-DED) is a metal additive manufacturing technique that provides high design flexibility and enables the fabrication of complex geometries. However, the rapid and localized thermal cycles inherent to the process lead to the formation of residual stresses, which degrade mechanical properties and dimensional accuracy of the fabricated parts. In this study, the effect of L-DED process parameters on residual stress formation was investigated using AISI 316L powder. Experiments were conducted by depositing material onto substrates fixed at both ends, and bending deformation after constraint removal was measured to evaluate the residual stress. The influences of key process parameters, including laser power, scan speed, and scanning strategy, were systematically examined. A finite element method (FEM) simulation based on the birth and death technique was developed to replicate the thermal and mechanical behavior during the L-DED process. The simulation incorporated the temperature gradient mechanism (TGM) and thermal strain of deposited layers to improve prediction accuracy. The FEM model successfully reproduced the experimental trends, accurately predicting both the bending height and residual stress distributions under various processing conditions. In particular, the model effectively captured the influence of different scanning strategies on the stress profile, demonstrating its ability to simulate processinduced thermal and mechanical behaviors with high fidelity. These findings provide a quantitative basis for optimizing L-DED parameters and contribute to process design strategies aimed at minimizing residual stress and enhancing dimensional stability in metal additive manufacturing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Saboori · 2020
2. 10.3365/kjmm.2022.60.1.4610.3365/kjmm.2022.60.1.46 ↗
3. 10.3365/kjmm.2023.61.10.77210.3365/kjmm.2023.61.10.772 ↗
4. 10.1108/1355254061070701310.1108/13552540610707013 ↗
5. Lalegani Dezaki · 2022 · 100054
6. 10.1016/j.addma.2017.07.00710.1016/j.addma.2017.07.007 ↗
7. Pant · 2020
8. 10.1007/s11340-022-00879-x10.1007/s11340-022-00879-x ↗
9. 10.1016/j.jmapro.2023.11.01810.1016/j.jmapro.2023.11.018 ↗
10. 10.1007/s00170-019-04204-010.1007/s00170-019-04204-0 ↗
11. 10.1007/s12540-022-01293-710.1007/s12540-022-01293-7 ↗
12. Stoney · 1909 · 172
13. 10.1016/j.addma.2015.07.00110.1016/j.addma.2015.07.001 ↗
14. 10.1016/j.ijmecsci.2022.10717310.1016/j.ijmecsci.2022.107173 ↗
15. 10.1007/s11665-021-06407-710.1007/s11665-021-06407-7 ↗
16. 10.1016/j.promfg.2021.06.09310.1016/j.promfg.2021.06.093 ↗
17. 10.3365/kjmm.2023.61.10.76010.3365/kjmm.2023.61.10.760 ↗
18. 10.1016/j.surfcoat.2020.12595610.1016/j.surfcoat.2020.125956 ↗
19. 10.1016/j.msea.2023.14484510.1016/j.msea.2023.144845 ↗
20. 10.1016/j.ijfatigue.2024.10819710.1016/j.ijfatigue.2024.108197 ↗
21. Novotný · 2023 · 514
22. Using · 2021 · 1
23. Ratanapongpien · 2024
24. Chen · 2023
25. Bastola · 2023
26. Cheng · 2023
27. 10.1007/s40192-023-00292-910.1007/s40192-023-00292-9 ↗
28. Roney · 2022