journal article·2025-10-05Open access

Study on the Spheroidizing Annealing Behavior of Medium-Carbon Cr-Mo Steel for Ultra High Strength Cold Heading Quality Wire Rods

HyeonWoo Kang, ByoungLok Jang

Abstract

Medium-carbon Cr-Mo alloy steels for cold heading applications exhibit superior mechanical strength and heat resistance compared to conventional carbon steels, making them widely utilized in the automotive, machinery, and aerospace industries for high-strength fastening and precision-formed components. However, such high-strength steels often suffer from die wear and cracking during cold forming processes. To address these issues, optimization of spheroidizing annealing conditions through appropriate microstructural control via heat treatment is essential. In this study, spheroidizing annealing conditions were optimized for two steel grades: the widely used CHQ-grade SCM435 and a newly developed 1600 MPa-grade ultra-high-strength Cr-Mo alloy steel. A series of spheroidizing heat treatment conditions were applied to both steels, and their spheroidization behavior and mechanical characteristics were comparatively analyzed based on initial microstructural differences. Intercritical Annealing (IA) and Subcritical Annealing (SA) cycles were designed based on Ac1 and Ac3 transformation temperatures determined via DSC analysis. The results revealed that both steels exhibited optimal spheroidization and hardness reduction when subjected to IA conditions with a second heating temperature approximately 20–40 °C below Ac1. The lowest Vickers hardness was observed at 113 HV for SCM435 and 171 HV for the developed alloy, corresponding to an average decrease of 55% and 54.5% from their initial hardness, respectively. Microstructural observations showed that SCM435, which primarily consists of pearlite in a ferrite matrix, underwent effective spheroidization under both IA and SA conditions. In contrast, the bainitic structure of the developed alloy required prior austenitization under IA conditions to enable successful spheroidization. A quantitative evaluation using the morphological shape factor (F) confirmed there was a clear inverse relationship between hardness and F values, indicating that this factor can serve as a reliable metric for assessing cold formability and the effectiveness of spheroidizing heat treatment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Kuduzović · 2014 · 66
2. Turner · 2014 · 387
3. Jeong · 2024 · 185
4. 10.18494/sam.2019.251110.18494/sam.2019.2511 ↗
5. Jo · 2023 · 275
6. Qi · 2023 · 2200733
7. 10.1007/s12540-024-01643-710.1007/s12540-024-01643-7 ↗
8. Lee · 2004 · 211
9. 10.1007/s11665-016-2461-110.1007/s11665-016-2461-1 ↗
10. 10.1051/matecconf/20181440200810.1051/matecconf/201814402008 ↗
11. Qi · 2024 · 2300376
12. 10.1007/bf0283311010.1007/bf02833110 ↗
13. Jeong · 2006 · 270
14. 10.1016/s1359-6462(99)00168-210.1016/s1359-6462(99)00168-2 ↗
15. 10.1007/s12613-014-0861-510.1007/s12613-014-0861-5 ↗
16. 10.2355/tetsutohagane1955.62.1_10010.2355/tetsutohagane1955.62.1_100 ↗
17. Erişir · 2013 · 1
18. Hairer · 2008 · 50
19. Lee · 2021 · 269
20. 10.1007/s13632-019-00536-110.1007/s13632-019-00536-1 ↗
21. 10.1007/s40195-018-0805-610.1007/s40195-018-0805-6 ↗
22. 10.2320/matertrans.45.327210.2320/matertrans.45.3272 ↗
23. Abbaszadeh · 2017 · e20170469
24. 10.1016/j.msea.2021.14142610.1016/j.msea.2021.141426 ↗
25. 10.3365/kjmm.2022.60.2.10210.3365/kjmm.2022.60.2.102 ↗
26. Park · 2008 · 59
27. Hernandez-Silva · 1992 · 1297
28. 10.3390/app923509410.3390/app9235094 ↗
29. Pawlowski · 2012 · 185
30. 10.1007/bf0199680210.1007/bf01996802 ↗
31. Silva · 1992 · 1297
32. O’Brien · 1997 · 69
33. He · 2020 · 1900287
34. Alza · 2021 · 63
35. 10.3390/ma1108144110.3390/ma11081441 ↗
36. 10.1007/bf0264665010.1007/bf02646650 ↗