Experimental Evaluation of Unidirectional Pulsating Traveling Magnetic Field Effectiveness for High-Strength 7xxx-Series Aluminum Alloy Slab Semi-Continuous Casting
Source abstract
Abstract
This study investigates the application of a unidirectional pulsating traveling magnetic field (UPTMF) for the semi-continuous casting of high-strength aluminum alloy 7075 slabs (350×150 mm). The experimental setup involved a comparative analysis of direct chill (DC) casting and electromagnetic stirring (EMS) with a 5 Hz amplitude modulated U-PTMF and 22.5 Hz carrier frequency, focusing on microstructural evolution, chemical composition homogeneity, and defect formation. Microstructural analysis demonstrated that slabs cast under conventional DC conditions exhibited columnar dendritic structures with a grain size heterogeneity ranging from 90 to 125 μm in the center and up to 160 μm near the surface. In contrast, the EMS-treated slabs showed a more uniform and refined microstructure with equiaxed grains of 80~90 μm in the center and 90~125 μm at the surface. The electromagnetic stirring facilitated grain refinement by inducing forced convection, the fragmentation of dendritic arms, and mechanical electromagnetic vibration effects. Chemical composition measurements of the DC slabs indicated severe macro segregation, with relative deviations (RD%) of Zn (5.27%~44%), Mg (7.2%~33.6%), and Cu (18%~51%). Conversely, the EMS-treated slabs displayed significantly reduced segregation, with deviations limited to 0.18%~2.7% for Zn, 0.4%~2.8% for Mg, and 0.67%~8.7% for Cu. These improvements resulted from enhanced melt mixing and homogenization induced by the traveling magnetic field. Additionally, the DC-cast slabs developed internal cracks due to post-casting thermal stress accumulation, while the EMS-treated slabs exhibited no visible defects, suggesting that the U-PTMF method effectively mitigates stress formation. The findings confirm that pulsed electromagnetic processing enhances microstructural uniformity and chemical homogeneity while preventing casting defects, offering a viable approach for improving aluminum alloy slab quality for aerospace and automotive applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Davis · 1993 · 1
2. Tiryakioğlu · 2013 · 15
3. Totten · 2003 · 100
4. Osório · 2017 · 200
5. Arnberg · 1987 · 50
6. Young · 1990 · 120
7. Smith · 2020 · 123
8. Brown · 2021 · 456
9. Anderson · 2019 · 789
10. Miller · 2018 · 237
11. Nguyen · 2017 · 870
12. Wang · 2019 · 118
13. Murakami · 2013 · 1
14. Li · 2015 · 145
15. Wang · 2003
16. Chen · 2017 · 91
17. Kolesnichenko · 1989
18. Tanaka · 2001 · 2334
19. Kolesnichenko · 2008
20. Kim · 2019
21. Slazhniev · 2018 · 424
22. Smith · 2002
23. Anderson · 1998
24. Zhang · 2012 · 56
25. 10.2355/isijinternational.46.68010.2355/isijinternational.46.680 ↗
26. Fredriksson · 2006 · 125
27. Grandfield · 2013 · 230
28. Smith · 2021 · 112345
29. 10.1016/j.actamat.2019.06.02810.1016/j.actamat.2019.06.028 ↗
30. Gerbeth · 2016 · 123
31. Lee · 2001 · 567
32. Beckermann · 1994 · 98
33. Fukuyama · 2003 · 432
34. Mazumder · 2005 · 789
35. Ren · 2019 · 1500
36. Tanaka · 2020 · 304
37. Campbell · 2012 · 1
38. Donskoy · 2010 · 456
39. Shabestari · 2007 · 1234
40. Flemings · 1974 · 1
41. Galtier · 2017 · 1
42. Wang · 2023 · 123
43. 10.3365/kjmm.2023.61.1.6010.3365/kjmm.2023.61.1.60 ↗
44. Li · 2022 · 112785
45. 2023