journal article·2024-11-05Open access

Effect of Si on the Yield Strength of Medium-Carbon Steels Consisting of Ferrite and Pearlite

Jae Hyeon Ko, Kyeong-Won Kim, Jae Hoon Jang, Ki-Young Lee, Hyun Park, Jung Han Kim, Jung Won Lee, Yong Hyun Kim, Sung Min Hong, Jun-Yun Kang, Yoon Suk Choi

Abstract

To enhance the intrinsic yield strength of the ferrite-pearlite microstructure that inevitably forms in a non-quenched-and-tempered steel for large structural components, this study analyzed the effect of adding Si. The resulting ferrite-pearlite microstructure in medium-carbon steels was examined, and the resulting increase in yield strength was interpreted based on strengthening mechanisms. Hot-rolled sheets of 0.3C-1.5Mn steels were fabricated with Si ranging from 0.22 to 2.21 wt. %. Austenitization was conducted at 880°C followed by slow continuous cooling, and ferrite-pearlite microstructures were formed. With increasing Si, the yield strength increased from 409.1 to 573.6 MPa. Although there was a negligible change in the austenitic grain size, the mean diameter of the ferritic grains decreased from 8.8 to 5.0 μm, while the mean interlamellar spacing of the pearlites decreased from 196.6 to 109.9 nm. Using these quantitative data about microstructural features and considering possible strengthening mechanisms, a model to predict yield strength was derived via a constrained optimization method. The resulting model indicated that the major mechanisms are the refinement of pearlitic interlamellar spacing and the solid solution strengthening of ferrite by Si. Their contribution to the increment in yield strength was over 75 %, while others such as ferritic grain refinement and increased pearlitic volume fraction have limited influence.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. 10.3390/met1201010110.3390/met12010101 ↗
2. 10.3365/kjmm.2021.59.9.60210.3365/kjmm.2021.59.9.602 ↗
3. 10.3365/kjmm.2021.59.10.69510.3365/kjmm.2021.59.10.695 ↗
4. 10.1007/s12540-019-00322-210.1007/s12540-019-00322-2 ↗
5. 10.2355/isijinternational.isijint-2018-50910.2355/isijinternational.isijint-2018-509 ↗
6. Lijuan · 2023 · 23
7. Lee · 2002
8. Gladman · 1986
9. William · 1982 · 164
10. 10.3365/kjmm.2021.59.9.60210.3365/kjmm.2021.59.9.602 ↗
11. Gladman · 1997 · 34
12. Rosann · 2022
13. Gaye · 2003
14. David · 2008
15. 10.1590/s1516-1439200500040001010.1590/s1516-14392005000400010 ↗
16. 10.1007/s13632-012-0034-810.1007/s13632-012-0034-8 ↗
17. Al salman · 1979 · 1391
18. Sibley · 1976
19. Gladman · 1972 · 916
20. Reiko · 2010 · 414
21. 2019
22. 2024
23. Gomes · 2015 · 12
24. Aranda · 2013 · 1778
25. 10.4028/www.scientific.net/amr.26-28.130710.4028/www.scientific.net/amr.26-28.1307 ↗
26. 10.2355/isijinternational.51.47610.2355/isijinternational.51.476 ↗
27. 2024
28. 2024
29. Coates · 1972 · 1203
30. Coates · 1973 · 1077
31. 10.1016/0079-6425(85)90004-010.1016/0079-6425(85)90004-0 ↗
32. Enomoto · 1986 · 1381
33. 10.1007/bf0111196710.1007/bf01111967 ↗
34. Pandit · 2011
35. Ridley · 1984 · 1019
36. Zener · 1946 · 550
37. Hillert · 1957 · 757
38. 10.1016/0001-6160(68)90132-610.1016/0001-6160(68)90132-6 ↗
39. Hillert · 1969 · 231
40. 10.1016/0001-6160(68)90037-010.1016/0001-6160(68)90037-0 ↗
41. 10.1007/bf0265284410.1007/bf02652844 ↗
42. 10.1016/j.scriptamat.2004.06.00210.1016/j.scriptamat.2004.06.002 ↗
43. Bhadeshia · 2011
44. 10.1007/s11665-008-9225-510.1007/s11665-008-9225-5 ↗
45. Srinivas · 2019
46. 10.1038/s42254-021-00314-510.1038/s42254-021-00314-5 ↗
47. Philip · 1989 · 437
48. Heller · 1978 · 162