journal article·2017-12-05Open access

Effect of Heat-Treatment on the Elevated Temperature Compression and Compressive Creep Properties of Fe-14Cr Ferritic Oxide Dispersion Strengthened (ODS) Steel

Authors not provided

Abstract

This study investigated the microstructure and the ambient-elevated temperature compression and elevated temperature creep properties of Fe-14Cr ferritic ODS steel manufactured by mechanical alloying (high energy ball milling) and hot extrusion processes. Initial microstructural observation of the as-extruded material identified elongated grains in the direction of extrusion; however, some recrystallization and grain growth were observed in the heat-treated material. The average grain sizes of the as-extruded material and heat-treated material were 0.4 and 1.1 m, respectively. In addition, the heat treatment resulted in the increase in number density and the decrease in size of the nanocluster. A room temperature compression tests confirmed the heat-treated materials (1457 MPa) had relatively higher yield than the as-extruded material (1377 MPa), and a general tendency was observed that the difference in yield strength decreased as temperature increased. Furthermore, elevated temperature compressive creep tests confirmed that the heat-treated material had relatively greater creep resistance compared to the as-extruded material at all stress levels.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · High-Temperature Coating Behaviors · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.