Effect of Oxygen Content on the Phase Transformation of Ti-5Al-2.5Fe Alloy During Continuous Cooling
Source abstract
Abstract
The effects of oxygen content on the to phase transformation of the Ti-5Al-2.5Fe alloy during continuous cooling were investigated by varying the oxygen content between 0.08 -0.41 wt%. Dilatometer tests were performed at cooling rates of 0.05 -100 /s combined with microstructure observation to examine phase transformation mechanisms and resulting microstructure. Our results showed that oxygen acted as a strong phase stabilizer by increasing -transus temperature, and promoted diffuse-controlled phase transformation with hindering martensitic transformation. Depending on the oxygen content, the different transformation mechanism led to a distinct difference in microstructure evolution. As an oxygen content increased, phase was developed in thicker lath forms and was globularized at a slow cooling rate, whereas the formation of acicular-shaped phase was significantly reduced. Hardness behavior after cooling was discussed in the light of microstructure morphology and possible precipitation formation. Based on the analysis results, continuous cooling transformation diagrams of the investigated alloys were established.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.