Hot Deformation Behavior of As-cast Low Nickel Fe-22Cr-9.5Mn-3.3Ni Austenite Steel
Source abstract
Abstract
The hot deformation behavior of as-cast and homogenized Fe-22Cr-9.5Mn-3.3Ni stainless steel was investigated over a temperature range between 600~1,250 . The deformability of the as-cast Fe-22Cr-9.5Mn-3.3Ni steel decreased with increasing temperature up to 850 , and then increased at temperatures between 900 and 1200 caused by dynamic recrystallization at high temperatures above 900 . At temperatures between 800 and 900 , the discontinuous precipitation of Cr2N and an decrease in ductility were observed in the as-cast steel. The ductility minimum at 850 in the as-cast Fe-22Cr-9.5Mn-3.3Ni could be associated with cracking at the interface of the lamellar chromium nitrides. The presence of fatal cracking at 1,250 and the loss of hot ductility can be attributed to the partial melting at austenite grain boundaries at high temperatures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.