journal article·2016-09-05Open access

Study on the Surface Microstructure of a Modified STD61 Steel Mold Used for the Die Casting Process

Young-Kook Lee, Ha-Young Yu, Seung-Joon Lee, Minwoo Kang, Suk-Jin Lee, Won Jon Yang, Jae Suk Jeong, Byung-Hoon Kim

Abstract

The surface microstructure and crack formation of an aluminum die-casting mold were investigated. The mold was made of a modified STD61 steel, and was used for more than 165,000 cycles. The mold surface consisted of four layers; an oxidized layer, a decarburized layer, a network carbide layer and a tempered martensite matrix. The depth down to the hardest network carbide layer was ~200 m. Inside the matrix, M3C transition carbides were dissolved so that solute C joined pre-existing M23C6 and MC carbides to make them coarse. About 60% of thermal fatigue cracks had a depth less than 200 m due to the hard network carbide layer, which obstructed the propagation of cracks. Cracks of over 200 m were filled with oxide wedges of Al and Si which was which flown from the molten alloy as well as the Fe oxide.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.