journal article·2023-10-05Open access

Optimization of Sintering Temperature for the Synthesis of n-type Mg3SbBi0.99Te0.01 Thermoelectric Materials

Sung-Jae Joo, Ji-Hee Son, JeongIn Jang, Bong-Seo Kim, Bok-Ki Min

Abstract

Mg3Sb2-based materials are promising candidates to replace n-type Bi2Te3 for cooling and power generation at low temperatures. Generally, the thermoelectric performance of a material is sensitively affected by synthesis process parameters, and among them, sintering temperature (Ts) is a critical one. In this study, n-type Mg3SbBi0.99Te0.01 polycrystalline samples were fabricated by mechanical alloying and spark plasma sintering (SPS), and the effects of varying Ts (923 – 1073 K) on the thermoelectric properties were investigated. Sintering Mg3SbBi0.99Te0.01 at an elevated temperature of 1073 K resulted in a notable increase in electrical conductivity at low temperatures below about 423 K. This is ascribed to a sharp reduction in carrier scattering by ionized impurities. For the same reason, the carrier mobility increased sharply at a Ts of 1073 K, which is a critical temperature for sintering in this study. Moreover, the Seebeck coefficient increased and thermal conductivity decreased simultaneously by raising Ts, resulting in the maximum power factor (PFmax) of 2.2 × 10-3 W m-1K-2 and the maximum dimensionless figure of merit (zTmax) of 1.20 in the sample sintered at 1073 K. Therefore, when Ts was raised from 923 K to 1073 K, the PFmax and zTmax increased by 29 % and 64 %, respectively. This improvement in performance is attributed to the annihilation of defects generated during the mechanical alloying process, which was confirmed by microstructure analysis by transmission electron microscopy (TEM).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. 10.1126/science.115889910.1126/science.1158899 ↗
2. 10.1016/j.enconman.2019.11237610.1016/j.enconman.2019.112376 ↗
3. 10.1016/j.applthermaleng.2021.11779310.1016/j.applthermaleng.2021.117793 ↗
4. 10.1126/science.aaa416610.1126/science.aaa4166 ↗
5. 10.1016/j.jallcom.2021.16103010.1016/j.jallcom.2021.161030 ↗
6. 10.3365/kjmm.2020.58.10.72110.3365/kjmm.2020.58.10.721 ↗
7. 10.3365/kjmm.2022.60.6.46310.3365/kjmm.2022.60.6.463 ↗
8. Lim · 2017 · 651
9. Jang · 2018 · 66
10. 10.1002/adma.20160395510.1002/adma.201603955 ↗
11. Shu · 2019 · 1807235
12. Mao · 2019 · 6452
13. 10.1016/j.nanoen.2018.07.05910.1016/j.nanoen.2018.07.059 ↗
14. 10.1039/c8ee03374a10.1039/c8ee03374a ↗
15. 10.1016/j.mtphys.2020.10033610.1016/j.mtphys.2020.100336 ↗
16. Ying · 2021 · 1121
17. 10.1039/c8ta08975b10.1039/c8ta08975b ↗
18. 10.1016/j.jmat.2020.03.00310.1016/j.jmat.2020.03.003 ↗
19. 10.1016/j.mtphys.2021.10036210.1016/j.mtphys.2021.100362 ↗
20. 10.1515/zpch-1933-211210.1515/zpch-1933-2112 ↗
21. 10.1103/physrev.77.38810.1103/physrev.77.388 ↗
22. 10.1073/pnas.171172511410.1073/pnas.1711725114 ↗
23. Zhang · 2020 · 1906143
24. Goldsmid · 2010 · 23
25. 10.1016/j.joule.2018.06.01410.1016/j.joule.2018.06.014 ↗
26. Zhu · 2020 · 4589786
27. Zhang · 2018 · 4716